Listar por autor "Mancinelli, Beatriz"
Mostrando ítems 21-31 de 31
-
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz; Chamorro, Juan Camilo (2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ... -
On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz; Chamorro, Juan Camilo; Cejas, Ezequiel (2015-02-06)Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the ... -
On the space-charge boundary layer inside the nozzle of a cutting torch.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2009)A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type ... -
On the Use of Sweeping Langmuir Probes in Cutting Arc Plasmas—Part I: Experimental Results.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2008)The first study of Langmuir probes applied to cut ting arcs using a sweeping-probe system is presented. It is found that, under a relatively broad range of experimental conditions (changes in the probe material, in the ... -
On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortexstabilized nitrogen plasma jet.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2014)Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type ... -
On the use of the metallic nozzle of a cutting arc torch as a Langmuir probe.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2008)The region inside the nozzle (bore diameter ≈1 mm) of a cutting arc torch is inaccessible to most plasma diagnostics, and numerical simulations are the only means to find out the relative importance of several physical ... -
On the use of the Prandtl mixing length model in the cutting torch modeling.
Mancinelli, Beatriz; Minotti, Fernando Oscar; Kelly, Héctor (2011-05-25)The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient ... -
Plasma Cutting of Concrete: Heat Propagation and Molten Material Removal From the Kerf.
Chamorro, Juan Camilo; Prevosto, Leandro; Cejas, Ezequiel; Milardovich, Natalio; Mancinelli, Beatriz; Fischfeld, Gerardo (2019)An experimental investigation of heat propagation in the case of plasma cutting of concrete is reported. The experiments were carried out by using a high-enthalpy nitrogen plasma jet generated in a dc vortex-stabilized ... -
Schlieren technique applied to the arc temperature measurement in a high energy density cutting torch.
Prevosto, Leandro; Artana, Guillermo; Kelly, Héctor; Mancinelli, Beatriz (2010)Plasma temperature and radial density profiles of the plasma species in a high energy density cutting arc have been obtained by using a quantitative schlieren technique. A Z-type two-mirror schlieren system was used in ...