Buscar
Mostrando ítems 1-10 de 11
Corrosion resistance of DLC hard coatings deposited over nitrided PH stainless steel
(2014-07-23)
In this work a DLC film was deposited over ion nitrided PH stainless steel Corrax® with a Si interlayer in a CVD Plasma, where the plasma was generated and sustained by an asymmetric pulsed DC discharge. A nitrided sample ...
Characterization of thick and soft DLC coatings deposited on plasma nitrided stainless steel
(2014-09-15)
Thick and soft DLC coatings were deposited by PACVD with a DC pulsed discharge on nitrided and non nitrided austenitic stainless steel. The films were characterized by EDS and Raman, hardness was assessed with nanoindenter ...
Comparison of wear and corrosion behavior of three different nitriding methods on AISI 316L stainless steel
(2013-07-05)
In this work, AISI316L stainless steel was nitrided using three different processes: Low Energy Ion Implantation (LEII), Plasma Immersion Ion Implantation (PI3) and DC Pulsed Plasma Nitriding (DCPPN). The process temperature ...
Wear resistance of nitrided and DLC coated PH stainless steel
(2013-05-27)
In this work PH stainless steel Corrax(R) was ion nitrided and coated with DLC in a CVD process.
Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martensitic stainless steel
(2017-08-25)
The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical
inertness [1]. However, they have adhesion problems when they are deposited on metallic substrates. For this reason, a thin ...
Microstructure and wear behavior of TiN coatings deposited on nitrided stainless steel by PBII&D
(2017-09-14)
This work presents the wear behavior of TiN coatings obtained by cathodic arc discharge combined with implantation and temperature on AISI 316L stainless steel previously ion nitrided.
Mechanical and corrosion behaviour of DLC and TiN coatings deposited on martensitic stainless steel
(2017-09-10)
The objective of this work is to compare the wear, friction, adhesion and corrosion behaviour of commercial TiN and DLC coatings deposited on AISI 420 stainless steel.
Mechanical properties and corrosion behaviour of DLC monolayers and multilayers deposited over nitrided martensitic stainless steel
(2019-09-24)
DLC coatings have unique properties such as very low coefficient of criction and chemical inertness and they are used extensively as protection and solid lubricants in many industrial applications. Nevertheless, adhesion ...
Thermal stability of DLC coating deposited on precipitation hardening stainless steels
(2015-11-17)
Relationship between nanohardness and annealing temperature of DLC coating on duplex (previously nitrided) and only coated PH steel samples.
Wear resistance of an Hyperlox Gold® coating over nitrided martensitic AISI 420 stainless steel
(2022-09-15)
Martensitic stainless AISI 420 steel was plasma nitrided and then coated with an Hyperlox Gold® coating (Cemecon), using the PVD magnetron sputtering technique in an industrial facility at Coating.Tech, Argentina. The ...