Listar FRVT - Producción Científica por título
Mostrando ítems 55-74 de 94
-
Matemática en la Ingeniería, Seminario Universitario de Ingreso 2021, UTN Facultad Regional Venado Tuerto
(UTN FRVT, 2022-06-06)En este trabajo se presenta una experiencia educativa que promueve el aprendizaje centrado en el alumno en el área Matemática durante el seminario universitario de ingreso del año 2021, de las carreras ingeniería Civil e ... -
Medición de humedades en madera con Xilohigrómetros, comparación y corrección.
(edUTecNe, 2013)El trabajo presenta la comparación de mediciones de humedad en la madera de dos xilohigrómetros diferentes con la real obtenida según lo estipula la norma IRAM 9532, para determinar el error de su lectura y obtener una ... -
Metodologías SIG para la elaboración de indicadores de arbolado urbano: caso de aplicación B° Norte, Venado Tuerto.
(UTN FRVT, 2021-10-06)La urbanización es uno de los grandes responsables de la reducción y pérdida de los ecosistemas, siendo un claro ejemplo el desplazamiento de los árboles mediante el avance de las construcciones. Debido a los grandes ... -
“Una mirada desde los docentes de la Universidad Tecnológica Nacional sobre el desarrollo de las competencias políticas, sociales y actitudinales en carreras de ingeniería”.
(FRVT, 2022-09)La sociedad actual plantea nuevos paradigmas a la universidad en general y, en particular, para aquellas casas de altos estudios que forman ingenieros. Actualmente la modalidad de pensamiento lógico-científico tradicional ... -
Modelling of an Atmospheric Pressure Nitrogen Glow Discharge Operating in High-Gas Temperature Regimes.
(2016)A model of an atmospheric pressure nitrogen glow discharge in high-gas tem perature regimes is developed. The model considers a fairly complete set of chemical reactions, including several processes with the participation ... -
Modelling of an Atmospheric–Pressure Air Glow Discharge Operating in High–Gas Temperature Regimes: The Role of the Associative Ionization Reactions Involving Excited Atoms.
(2020)A model of a stationary glow-type discharge in atmospheric-pressure air operated in high-gas-temperature regimes (1000 K < Tg < 6000 K), with a focus on the role of associative ionization reactions involving N(2D,2P)-excited ... -
Modelling of the Plasma–Sheath Boundary Region in Wall-Stabilized Arc Plasmas: Unipolar Discharge Properties.
(2017)A two-dimensional model of the non-equilibrium unipolar discharge occurring in the plasma–sheath boundary region of a transferred-arc was developed. This model was used to study the current transfer to the nozzle (1 mm ... -
Normalización de la madera pino Ponderosa.
(2020)El pino ponderosa, la especie forestal más plantada en Norpatagonia, acaba de ser incorporada en los Suplementos del Reglamento Argentino de Estructuras de Madera (INTI-CIRSOC 601) y por lo tanto tiene el aval normativo ... -
Numerical investigation of the double-arcing phenomenon in a cutting arc torch.
(2014)A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the ... -
Numerical Modelling of a Cutting Arc Torch
(Jan Awrejcewicz. INTECH, 2014-02-14)Plasma cutting is a process of metal cutting at atmospheric pressure by an arc plasma jet, where a transferred arc is generated between a cathode and a work-piece (the metal to be cut) acting as the anode . Small nozzle ... -
On the Double-Arcing Phenomenon in a Cutting Arc Torch.
(2011)Transferred arc plasma torches are widely used in industrial cutting process of metallic materials because of their ability to cut almost any metal and the very high productivity that can be achieved with this technology ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
(ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
(2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
(2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ... -
On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime
(2015-02-06)Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the ... -
On the space-charge boundary layer inside the nozzle of a cutting torch.
(2009)A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type ... -
On the Use of Sweeping Langmuir Probes in Cutting Arc Plasmas—Part I: Experimental Results.
(2008)The first study of Langmuir probes applied to cut ting arcs using a sweeping-probe system is presented. It is found that, under a relatively broad range of experimental conditions (changes in the probe material, in the ... -
On the Use of Sweeping Langmuir Probes in Cutting-Arc Plasmas—Part II: Interpretation of the Results.
(2008)A semiempirical Langmuir probe model is intro duced that is particularly adapted to high-energy-density cutting arcs, for which, as we have shown in Part I, the ion current collected by negatively biased probes shows no ... -
On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortexstabilized nitrogen plasma jet.
(2014)Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type ...