Listar FRCU - GIS: Grupo de Ingeniería de Superficies - Comunicaciones a Congresos por título
Mostrando ítems 87-106 de 121
-
Ingreso y permanencia en carreras científicas y tecnológicas: el desafío de mejorar la relación de los estudiantes con las ciencias
(2016-08-25)Es conocida la baja proporción de estudiantes secundarios que eligen las carreras de Ingeniería o Ciencias para seguir su estudio universitario. Las causas pueden ser variadas, pero una de la más importantes está relacionada ... -
Laser patterning combinado con nitruración iónica como herramienta para controlar el comportamiento tribológico de componentes de acero
(Comisión Nacional de Energía Atómica, 2018-10-05)En este trabajo se analiza la combinación secuencial de nitruración y laser patterning, en ambos órdenes de aplicación, en comparación con muestras del mismo material con los tratamientos individuales. La nitruración fue ... -
Laser texturing combined with plasma nitriding as a tool to control the tribological performance of steel components
(2018-09-28)In this work the sequential combination of both plasma nitriding and laser patterning is analyzed comparing to individual treatments over the same material. -
Mechanical and corrosion behavior of thick and soft DLC coatings
(2015-10-09)In this work, the corrosion and mechanical behavior, so as the adhesion of DLC coatings are studied. -
Mechanical and corrosion behavior of TiN coatings deposited on nitrided AISI 420 stainless steel
(2019-06-26)TiN coatings are widely used in different applications for extending components lifetime due to their high hardness and good wear resistance. However, it is not convenient to deposit them on soft stainless steels. In this ... -
Mechanical and corrosion behaviour of DLC and TiN coatings deposited on martensitic stainless steel
(2017-09-10)The objective of this work is to compare the wear, friction, adhesion and corrosion behaviour of commercial TiN and DLC coatings deposited on AISI 420 stainless steel. -
Mechanical properties and corrosion behaviour of DLC monolayers and multilayers deposited over nitrided martensitic stainless steel
(2019-09-24)DLC coatings have unique properties such as very low coefficient of criction and chemical inertness and they are used extensively as protection and solid lubricants in many industrial applications. Nevertheless, adhesion ... -
Microstructure and corrosion behavior of TiN coatings deposited on nitrided stainless steel by PBII&D
(2015-10-09)In this work, Ti-TiN bilayer coatings obtained by PBII&D on nitrided austenitic stainless steel in order to improve not only hardness but also corrosion resistance compared with the samples which were only nitrided. -
Microstructure and corrosion behaviour of ion nitrided AISI 316L coated with titanium nitride
(2013-07-04)In this work Ti-TiN bilayer coatings obtained with a vacuum arc on previously nitride AISI 316L in order to improve not only hardness but also corrosion resistance compared with the samples which were only nitrided and the ... -
Microstructure and wear behavior of TiN coatings deposited on nitrided stainless steel by PBII&D
(2017-09-14)This work presents the wear behavior of TiN coatings obtained by cathodic arc discharge combined with implantation and temperature on AISI 316L stainless steel previously ion nitrided. -
Nitruración iónica de acero inoxidable martensítico en procesos cortos : estudio de la resistencia al desgaste y a la corrosión
(2023-11-10)En este trabajo se presentan resultados de un trabajo conjunto donde se nitruraron algunas muestras en un equipo semi industrial en la TU Freiberg en Alemania, y otras en un equipo experimental del Grupo GIS, en UTN, Argentina. -
Nitruración iónica del acero inoxidable AISI 316L : influencia del tamaño de grano en las propiedades de las capas nitruradas
(2014-10-11)En el presente trabajo se comparan dos aceros fabricados bajo las mismas normas pero de diferente procedencia, hecho que se verifica en la diferencia de tamaño de grano entre uno y otro y que motiva un análisis detallado ... -
¿La nitruración iónica puede ser un tratamiento de corta duración? : parámetros y resultados comparativos en un acero AISI 420
(2013-08)En este trabajo se presentan los resultados de microestructura y resistencia al desgaste de un acero inoxidable AISI 420 nitrurado durante 3 horas con diferentes parámetros y se comparan con los hallados en los tratamientos ... -
Nitruración y oxidación de AISI 4140 como protección contra el desgaste y la corrosión
(2022-05-02)En este trabajo se estudió el comportamiento al desgaste y a la corrosión de un acero AISI 4140 nitrurado por plasma y postoxidado en dos condiciones diferentes,procesos llevado a cabo en un reactor industrial de la empresa ... -
Nitruración y oxidación por plasma como reemplazo del cromado electrolítico para componentes de la industria petrolera
(Comisión Nacional de Energía Atómica, 2018-10-05)En este trabajo se presentan un estudio de aceros (AISI 1045 y 4140) nitrocarburados y nitrurados por plasma seguidos de un tratamiento de oxidación como alternativa al cromado. Se evaluaron distintas condiciones de proceso ... -
Plasma nitriding and plasma nitrocarburizing of a low alloy steel selected to produce camshafts for diesel engines
(2015-05-14)Camshafts are a relevant part of diesel engines of extended use today. These components work under torsion and are also prone to fatigue and wear damage. Usually they are manufactured by casting, forging or machining from ... -
Plasma nitriding plus oxidizing as a protective treatment for AISI 4140 steel
(2022-09-29)AISI 4140 is a typical chromium molybdenum medium alloy steel, widely used as construction steel for machine components. Plasma nitriding has been applied as surface hardening treatment with success but the nitrided layer ... -
Plasma surface engineering to enhance wear and corrosion resistance of stainless steels
(2014-11-11)A brief description of the research lines of the Surface Engineering Group of UTN will be presented, as well as some important results obtained in the last years concerning plasma nitriding of austenitic stainless steel ... -
Propiedades tribológicas y mecánicas de los recubrimientos en base carbono tipo DLC
(2017-08-17)Los recubrimientos hidrogenados en base crbono tipo DLC (Diamond Like Carbon), son depositados sobre diferentes aceros y resultan atractivos por su excelente comportamiento tribológico, bajo coeficiente de fricción, alta ... -
Protección de acero para instrumentos quirúrgicos con recubrimientos duros en base carbono tipo DLC
(2016-11-22)Los aceros inoxidables martensíticos como el AISI 420 tienen múltiples aplicaciones, entre ellas instrumentos quirúrgicos, donde se requiere buena resistencia al desgaste y a la corrosión. Los tratamientos de modificación ...