FRVT - Capítulos de Libros Internacionales

 

Material subido recientemente.

  • Efecto sobre la tensión de rotura en flexión de la altura de la sección en elementos estructurales de pino ponderosa. 

    Guillaumet, Alfredo; Manavella, Roberto; Filippetti, María Cecilia; Meyer, Lía Caren; Tosco, Andrea (UTN FRVT., 2023)
    La influencia de las dimensiones de la sección transversal en la resistencia a la flexión es un efecto contemplado en distintos reglamentos de estructuras de madera. En las normativas europeas y de Argentina la ...

  • The Impact of the Use of Large Non-Linear Lighting Loads in Low-Voltage Networks. 

    Milardovich, Natalio; Prevosto, Leandro; Lara, Miguel; Milardovich, Diego (IntechOpen., 2018)
    The principal numerical and experimental results obtained by the authors on the har monic power losses in low-voltage networks in the lighting area have been summarized in this review. Light-emitting diodes (LEDs) and ...

  • On the Double-Arcing Phenomenon in a Cutting Arc Torch. 

    Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2011)
    Transferred arc plasma torches are widely used in industrial cutting process of metallic materials because of their ability to cut almost any metal and the very high productivity that can be achieved with this technology ...

  • Numerical Modelling of a Cutting Arc Torch 

    Mancinelli, Beatriz; Minotti, Fernando Oscar; Prevosto, Leandro; Kelly, Héctor (Jan Awrejcewicz. INTECH, 2014-02-14)
    Plasma cutting is a process of metal cutting at atmospheric pressure by an arc plasma jet, where a transferred arc is generated between a cathode and a work-piece (the metal to be cut) acting as the anode . Small nozzle ...