Buscar
Mostrando ítems 1-10 de 16
Carbon based coatings deposited on stainless steel : study of thermal degradation
(2017-03-02)
Amorphous hydrogenated carbon (DLC) coatings have a high hardness depending on the relative amount of sp3/sp2 bondings. They also exhibit an extremaly low friction coefficient and are chemically inert. However, these ...
Protección de acero para instrumentos quirúrgicos con recubrimientos duros en base carbono tipo DLC
(2018-07-19)
Los aceros inoxidables martensíticos como el AISI 420 tienen múltiples aplicaciones, entre ellas instrumentos quirúrgicos, donde se requiere buena resistencia al desgaste
y a la corrosión. Los tratamientos de modificación ...
Characterization of DLC coatings over nitrided stainless steel with and without nitriding pre-treatment using annealing cycles
(2019-04-02)
Amorphous hydrogenated diamond-like carbon (DLC) coatings were deposited using plasma assisted chemical vapour deposition (PACVD) on precipitation hardening (PH) stainless steel. Plasma nitriding has been used as ...
Fretting wear resistance of DLC hard coatings deposited on nitrided martensitic stainless steel
(2019-03)
In this work, the fretting wear behavior and adhesion of DLC coatings deposited by PACVD on nitrided and non-nitrided martensitic stainless steels were studied. Fretting wear tests were carried out with different duration ...
Corrosion resistance of DLC hard coatings deposited over nitrided PH stainless steel
(2014-07-23)
In this work a DLC film was deposited over ion nitrided PH stainless steel Corrax® with a Si interlayer in a CVD Plasma, where the plasma was generated and sustained by an asymmetric pulsed DC discharge. A nitrided sample ...
Comportamiento mecánico de un recubrimiento DLC depositado sobre acero inoxidable martensítico previamente nitrurado
(2013-05-07)
En este trabajo se estudió el comportamiento tribológico de un film de DLC que fue depositado sobre acero inoxidable martensítico AISI 420 nitrurado, con dos terminaciones superficiales diferentes, previas a la nitruración ...
Comportamiento mecánico de un recubrimiento DLC sobre acero AISI 420 nitrurado por plasma con diferentes terminaciones superficiales
(2013-02-25)
En este trabajo se estudió el comportamiento tribológico de un film de DLC depositado sobre acero
inoxidable martensítico.
Wear resistance of nitrided and DLC coated PH stainless steel
(2013-05-27)
In this work PH stainless steel Corrax(R) was ion nitrided and coated with DLC in a CVD process.
Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martensitic stainless steel
(2017-08-25)
The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical
inertness [1]. However, they have adhesion problems when they are deposited on metallic substrates. For this reason, a thin ...
Mechanical and corrosion behaviour of DLC and TiN coatings deposited on martensitic stainless steel
(2017-09-10)
The objective of this work is to compare the wear, friction, adhesion and corrosion behaviour of commercial TiN and DLC coatings deposited on AISI 420 stainless steel.