FRVT - Artículos en Revistas Internacionales

Permanent URI for this collectionhttp://48.217.138.120/handle/20.500.12272/396

Browse

Start date: 2010End date: 2019

Search Results

Now showing 1 - 10 of 28
  • Thumbnail Image
    Item
    Interpretation of Voltage Measurements in Cutting Torches.
    (2015) Prevosto, Leandro; Kelly, Héctor; Minotti, Fernando Oscar; Mancinelli, Beatriz
    Anode-cathode and nozzle-cathode voltages, plenum pressure and gas mass flow measurements in a low current (30 A) cutting torch, operated with oxygen gas, are used as inputs for an electrical model coupled to a simplified fluid model, in order to infer some properties of the plasma-gas structure that are difficult to measure.
  • Thumbnail Image
    Item
    Diagnostics of cutting arc plasmas.
    (2014) Prevosto, Leandro; Kelly, Héctor
    An over-view of several remote and invasive diagnostics to characterize cutting arcs at the nozzle exit-anode gap as well as inside the nozzle is reported. A briefly description of the experimental set-ups, together with the main results obtained in a 30 A high-energy density cutting torch (including the calculation assumptions) are given.
  • Thumbnail Image
    Item
    Numerical modeling of the gas breakdown development in the space–charge layer inside the nozzle of a transferred arc torch
    (2012) Mancinelli, Beatriz; Prevosto, Leandro; Minotti, Fernando Oscar
    Double–arcing is a phenomenon that occurs when a transferred arc, flowing inside an electrically insulated nozzle, breaks into two separate arcs: one that connects the cathode with the nozzle, and another that connects the nozzle with the anode. Experimental evidence suggests that the reason for double–arcing is a Townsend like breakdown occurring in the thin space–charge layer, which separates the plasma from the metallic nozzle, due to the high voltage drop across it. Breakdown phenomena in a gas between metallic electrodes have been extensively studied; however the present case involves breakdown of a high–temperature gas between one electrode (the nozzle) and a plasma boundary. A 1–D model of the gas breakdown development in the space–charge layer contiguous to the nozzle of a cutting arc torch operated with oxygen is reported. The dynamics of the discharge is analyzed. The kinetic scheme includes processes of ionization of heavy particles by electron impact, electron attachment, electron–ion recombination and ion–ion recombination.
  • Thumbnail Image
    Item
    On the reduction of the third-order harmonic losses in low–voltage power cables used for feeding large LED and CFL lighting loads.
    (2017) Milardovich, Natalio; Prevosto, Leandro; Lara, Miguel Ángel; Milardovich, Diego
    An experimental investigation of diversity factors for LED (light emitting diode) in combination with CFL (compact fluorescent lamps) and LED lamps is presented in this paper. Attention was paid to the reduction of low–order harmonic currents, especially the third one; which is mainly responsible for the strong increase in power losses in the neutral conductor of low–voltage installations. The harmonic currents drawn by several LED and CFL lamps with nominal powers < 25 W were first measured to investigate the electrical characteristics of individual lamps. The results showed a sensible reduction of the harmonic current of third order and therefore a marked reduction of the power losses associated with them. The convenience of having LED lamps designed to operate as two–phase loads is suggested for certain applications of significant power demand.
  • Thumbnail Image
    Item
    On the dynamic behavior of the anode–arc–root at the nozzle surface in a non-transferred plasma torch
    (2012) Prevosto, Leandro; Risso, Marcelo Natalio; Infante, Damián Leandro; Cejas, Ezequiel; Kelly, Héctor; Mancinelli, Beatriz
    The dynamic behavior of the anode–arc–root at the nozzle surface of a plasma torch was experimentally investigated in this work. A gas (N2) vortex–stabilized non–transferred arc torch with a thoriated tungsten rod (2wt %) cathode (3.2 mm diameter) and a coaxial anode (5 mm diameter, 30 mm length) was used in the experiment. By using a sweeping Langmuir probe in floating condition, the voltage of the plasma jet outside the nozzle was inferred. Arc voltage waveforms were also obtained. Data have been obtained for an arc current of 100 A and a gas flow rate of 30 Nl min-1. A typical sawtooth shape (i.e., restrike mode) (with a fluctuating level of º  25 %) and a dominant frequency of º 6.5 kHz was observed in the arc voltage waveforms, which is attributed to anode–arc–root movements along the anode surface followed by a restrike at a certain point close to the cathode. By performing a time correlation between the probe and arc voltage oscillograms together with simple estimations, the amplitude of the movement of the arc–root along the anode surface as well its velocity were inferred.
  • Thumbnail Image
    Item
    Investigation of the relevant kinetic processes in the initial stage of a double-arcing instability in oxygen plasmas.
    (2018) Mancinelli, Beatriz; Prevosto, Leandro; Chamorro, Juan Camilo; Minotti, Fernando; Kelly, Héctor
    A numerical investigation of the kinetic processes in the initial (nanosecond range) stage of the double-arcing instability was developed. The plasma-sheath boundary region of an oxygen operated cutting torch was considered. The energy balance and chemistry processes in the dis charge were described. It is shown that the double-arcing instability is a sudden transition from a diffuse (glow-like) discharge to a constricted (arc-like) discharge in the plasma-sheath boundary region arising from a field-emission instability. A critical electric field value of 107 V/m was found at the cathodic part of the nozzle wall under the conditions considered. The field-emission instability drives in turn a fast electronic-to-translational energy relaxation mechanism, giving rise to a very fast gas heating rate of at least 109 K/s, mainly due to reactions of preliminary dissocia tion of oxygen molecules via the highly excited electronic state populated by electron impact. It is expected that this fast oxygen heating rate further stimulates the discharge contraction through the thermal instability mechanism.
  • Thumbnail Image
    Item
    Effects of non–thermal plasmas on seed-borne Diaporthe/Phomopsis complex and germination parameters of soybean seeds.
    (2018) Pérez Pizá, María Cecilia; Prevosto, Leandro; Zilli, Carla; Cejas, Ezequiel; Kelly, Héctor; Balestrasse, Karina
    Diaporthe/Phomopsis (D/P) is a complex of seed-borne fungi that severely affects soybean (Glycine max (L.) Merrill), one of the most important crops worldwide. Non-thermal plasma treatment is a fast, economic and ecological friendly technology that can destroy seed-borne fungi and improve seed quality. Soybean seeds were exposed for 1, 2 and 3 minutes to a quasi-stationary (50 Hz) dielectric barrier discharge plasma operating at atmospheric pressure air. Different carrying gases (O2 and N2) and barrier-insulating materials were used. In this work we focused on the ability of plasma to control D/P in soybean seeds and to enhance seed quality. To support these results, different antioxidant enzymes (catalase, superoxide dismutase and guaiacol peroxidase), lipid peroxidation and phytohormones (ABA and AIA) content in seeds were evaluated. The results demonstrated reductions of 29% in catalase activity and increments of 30% in glutathione content after plasma treatment, reversing the oxidative damage caused by D/P fungi. This eco-friendly technology improved soybean seed quality and, for the first time, its efficiency in controlling soybean seed-borne pathogen fungi that colonize the inside of seeds was demonstrated.
  • Thumbnail Image
    Item
    Quantitative Schlieren Diagnostic Applied to a Nitrogen Thermal Plasma Jet.
    (2018) Chamorro, Juan Camilo; Prevosto, Leandro; Cejas, Ezequiel; Kelly, Héctor
    — A quantitative interpretation of the schlieren technique applied to an atmospheric pressure, vortex-stabilized nitrogen thermal plasma jet generated in a direct-current nontransferred arc plasma torch (nitrogen gas flow rate of 25 NL/min, power level of 15 kW), discharging into ambient air is reported. A Z-type, two-mirror schlieren system was used in the research. The technique allowed inferring the temporally averaged values of the temperatures and densities of different species present in the plasma jet in a wide range of radial and axial distances. Deviations from kinetic equilibrium in the calculation of the plasma refractive index were accounted for, but maintaining the assumption of the local chemistry equilibrium. The influence of several assumptions on the accuracy of the measurements was considered. The results have shown that for a distance of 3.5-mm downstream from the nozzle exit, the kinetic equilibrium is realized (being both electron and gas temperatures values around 11 000 K), but noticeable deviation from kinetic equilibrium appears toward the jet border. On the other hand, a marked deviation from the kinetic equilibrium was found in the whole far field of the plasma jet, where the electron temperature remains still quite high (about 10 000 K at 30-mm downstream of the nozzle exit), well decoupled from the gas temperature (about 7000 K at the same distance). The obtained results are in reasonable good agreement with those previously reported by some of the authors by using a double floating probe method in the same plasma torch.
  • Thumbnail Image
    Item
    Improvement of growth and yield of soybean plants through the application of non-thermal plasmas to seeds with different health status.
    (2019) Pérez Pizá, María; Prevosto, Leandro; Grijalba, Pablo; Zilli, Carla; Cejas, Ezequiel; Mancinelli, Beatriz; Balestrasse, Karina
    Soybean (Glycine max (L.) Merrill) is a globally important crop, providing oil and protein. Diaporthe/Phomopsis complex includes seed-borne pathogens that affect this legume. Non-thermal plasma treatment is a fast, cost-effective and environmental-friendly technology. Soybean seeds were exposed to a quasi stationary (50 Hz) dielectric barrier discharge plasma operating at atmospheric pressure air. Different carrying gases (O2 and N2) and barrier insulating materials were used. This work was performed to test if the effects of non-thermal plasma treatment applied to healthy and infected seeds persist throughout the entire cycle of plants. To this aim, lipid peroxidation, activity of catalase, superoxide dismutase and guaiacol peroxidase, vegetative growth and agronomic traits were analysed. The results here reported showed that plants grown from infected seedsdid not trigger oxidative stress due to the reduction of pathogen incidence in seeds treated with cold plasma. Vegetative growth revealed a similar pattern for plants grown from treated seeds than that found for the healthy control. Infected control, by contrast, showed clear signs of damage. Moreover, plasma treatment itself increased plant growth, promoted a normal and healthy physiological performance and incremented the yield of plants. The implementation of this technology for seeds treatment before sowing could help reducing the use of agrochemicals during the crop cycle.
  • Thumbnail Image
    Item
    Plasma Cutting of Concrete: Heat Propagation and Molten Material Removal From the Kerf.
    (2019) Chamorro, Juan Camilo; Prevosto, Leandro; Cejas, Ezequiel; Milardovich, Natalio; Mancinelli, Beatriz; Fischfeld, Gerardo
    An experimental investigation of heat propagation in the case of plasma cutting of concrete is reported. The experiments were carried out by using a high-enthalpy nitrogen plasma jet generated in a dc vortex-stabilized nontransferred arc torch. Concrete plates of different thicknesses up to 52 mm and with and without steel reinforcement were used. The plates were placed horizontally while cutting. The heat conduction losses inside the material were estimated by comparing thermocouple measurements and theoretical temperatures obtained with an analytical model of the heat propagation in the material. The influence of the molten concrete layer that separates the plasma to the solid material due to the high viscosity of the liquid concrete was accounted for. The power losses below the material in the extinguishing plasma have also been determined from calorimet ric measurements. For different plate thicknesses and cutting velocities, a complete power balance of the process is performed with the calculation of the cutting efficiency on the basis of various relevant power terms. In addition, the hydrodynamics of the molten concrete layer in the kerf is analyzed. For a mean power level of 11.2 kW and a nitrogen gas flow rate of 25 Nl/min, the torch is able to cut a concrete plate of 52 mm in thickness with a speed of 20 mm/min and a whole efficiency of about 30%. The viscosity force is the main limiting factor on the cutting velocity in thick plates.