Now showing items 1-10 of 14
Corrosion resistance of AISI 316L stainless steel nitrided by three different plasma assisted techniques.
Plasma assisted surface modification methods have been used to nitride stainless steels in order to enhance hardness and therefore the lifetime of industrial componentes. Nevertheless, the corrosion resistance is not always ...
Thermal stability of DLC coating deposited on precipitation hardening stainless steels
Relationship between nanohardness and annealing temperature of DLC coating on duplex (previously nitrided) and only coated PH steel samples.
Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martensitic stainless steel
The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical inertness . However, they have adhesion problems when they are deposited on metallic substrates. For this reason, a thin ...
Mechanical and corrosion behaviour of DLC and TiN coatings deposited on martensitic stainless steel
The objective of this work is to compare the wear, friction, adhesion and corrosion behaviour of commercial TiN and DLC coatings deposited on AISI 420 stainless steel.
Microstructure and wear behavior of TiN coatings deposited on nitrided stainless steel by PBII&D
This work presents the wear behavior of TiN coatings obtained by cathodic arc discharge combined with implantation and temperature on AISI 316L stainless steel previously ion nitrided.
Corrosion and wear properties of plasma nitrided 316L stainless steel
Since 2010, in the frame of the European SUMA2 project and the binational project, the University of Saarland (Saarbrucken, Germany), the Leibniz Institute (Leipzig, Germany), INTEMA (Mar del Plata, Argentina) and the ...
Wear resistance of nitrided and DLC coated PH stainless steel
In this work PH stainless steel Corrax(R) was ion nitrided and coated with DLC in a CVD process.
Corrosion resistance of AISI 316L stainless steel nitrided by three different plasma assisted techniques
Plasma assisted surface modification methods have been used to nitride stainless steels in order to enhance and therefore the lifetime of industrial components. Nevertheless, the corrosion resistance is not always preserved ...
Corrosion resistance of DLC hard coatings deposited over nitrided PH stainless steel
In this work a DLC film was deposited over ion nitrided PH stainless steel Corrax® with a Si interlayer in a CVD Plasma, where the plasma was generated and sustained by an asymmetric pulsed DC discharge. A nitrided sample ...
Characterization of thick and soft DLC coatings deposited on plasma nitrided stainless steel
Thick and soft DLC coatings were deposited by PACVD with a DC pulsed discharge on nitrided and non nitrided austenitic stainless steel. The films were characterized by EDS and Raman, hardness was assessed with nanoindenter ...