Buscar
Mostrando ítems 1-10 de 119
Comportamiento al desgaste de un acero SAE 1045, templado por inducción posterior a la nitruración iónica : películas delgadas y tratamiento de superficie
(2015-11-17)
Los aceros al carbono son ampliamente utilizados en la industria metalmecánica en los componentes de las maquinarias; esto se debe a que se puede mejorar sus propiedades: como obtener alta dureza y tenacidad a un costo ...
Implementación y desarrollo de un método holográfico digital para la determinación de superficies de nivel
(2018-06-06)
Los aceros inoxidables son usados ampliamente en la industria química, médica, alimenticia, automotriz hidráulica, de petróleo y gas, donde se requiere buena
resistencia al desgaste y a la corrosión. Sus propiedades ...
Carbon based coatings deposited on stainless steel : study of thermal degradation
(2017-03-02)
Amorphous hydrogenated carbon (DLC) coatings have a high hardness depending on the relative amount of sp3/sp2 bondings. They also exhibit an extremaly low friction coefficient and are chemically inert. However, these ...
Plasma surface engineering to enhance wear and corrosion resistance of stainless steels
(2014-11-11)
A brief description of the research lines of the Surface Engineering Group of UTN will be presented, as well as some important results obtained in the last years concerning plasma nitriding of austenitic stainless steel ...
Protección de acero para instrumentos quirúrgicos con recubrimientos duros en base carbono tipo DLC
(2018-07-19)
Los aceros inoxidables martensíticos como el AISI 420 tienen múltiples aplicaciones, entre ellas instrumentos quirúrgicos, donde se requiere buena resistencia al desgaste
y a la corrosión. Los tratamientos de modificación ...
Characterization of DLC coatings over nitrided stainless steel with and without nitriding pre-treatment using annealing cycles
(2019-04-02)
Amorphous hydrogenated diamond-like carbon (DLC) coatings were deposited using plasma assisted chemical vapour deposition (PACVD) on precipitation hardening (PH) stainless steel. Plasma nitriding has been used as ...
Comparación del comportamiento al desgaste de un acero AISI 1045 nitrurado y seguido de un temple por inducciónComparison of behaviour wear of nitrided and induction hardened-nitrided aisi 1045 steel
(2016-10)
Se estudió el comportamiento al desgaste del acero AISI1045 con un tratamiento de nitruración iónica y posterior temple por inducción. Se midió dureza en superficie y perfil en profundidad. Se analizó la microestructura y ...
Influencia de la nitruración por plasma sobre el comportamiento a la corrosión y la adhesión de recubrimientos DLC sobre acero inoxidable AISI 420
(2016-04)
En este trabajo se estudió el comportamiento a la corrosión y la adhesión de dos recubrimientos DLC (“Diamond Like Carbon”), “Soft” y “Hard”, depositados por PACVD (“Plasma Assisted Chemical Vapour Deposition”) sobre acero ...
Influence of the pre-treatments and process temperature on the adhesion of TiN films deposited by PBII&D over nitrided austenitic stainless steel
(2019-10-28)
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was ...
Carbon based DLC films : influence of the processing parameters on the structure and properties
(2018-07-19)
Hydrogenated carbon-based films, such as DLC (“Diamond Like Carbon”), have interesting properties such as excellent tribological behavior, low friction coefficient, high superficial hardness and good wear resistance; they ...