Buscar
Mostrando ítems 1-10 de 16
Plasma surface engineering to enhance wear and corrosion resistance of stainless steels
(2014-11-11)
A brief description of the research lines of the Surface Engineering Group of UTN will be presented, as well as some important results obtained in the last years concerning plasma nitriding of austenitic stainless steel ...
Corrosion resistance of DLC hard coatings deposited over nitrided PH stainless steel
(2014-07-23)
In this work a DLC film was deposited over ion nitrided PH stainless steel Corrax® with a Si interlayer in a CVD Plasma, where the plasma was generated and sustained by an asymmetric pulsed DC discharge. A nitrided sample ...
Characterization of thick and soft DLC coatings deposited on plasma nitrided stainless steel
(2014-09-15)
Thick and soft DLC coatings were deposited by PACVD with a DC pulsed discharge on nitrided and non nitrided austenitic stainless steel. The films were characterized by EDS and Raman, hardness was assessed with nanoindenter ...
Influence of inclusions on the corrosion attack of plasma nitrided austenitic stainless steel
(2013-09-08)
Austenitic stainless steels are well known for their good localized corrosion resistance. They are commonly employed in components and instruments in the food and beverage, as well as chemical, oil and medical industries. ...
Corrosion resistance of AISI 316L stainless steel nitrided by three different plasma assisted techniques
(2014-07-23)
Plasma assisted surface modification methods have been used to nitride stainless steels in order to enhance and therefore the lifetime of industrial components. Nevertheless, the corrosion resistance is not always preserved ...
Comparison of wear and corrosion behavior of three different nitriding methods on AISI 316L stainless steel
(2013-07-05)
In this work, AISI316L stainless steel was nitrided using three different processes: Low Energy Ion Implantation (LEII), Plasma Immersion Ion Implantation (PI3) and DC Pulsed Plasma Nitriding (DCPPN). The process temperature ...
Wear resistance of nitrided and DLC coated PH stainless steel
(2013-05-27)
In this work PH stainless steel Corrax(R) was ion nitrided and coated with DLC in a CVD process.
Corrosion and wear properties of plasma nitrided 316L stainless steel
(2018-09-28)
Since 2010, in the frame of the European SUMA2 project and the binational project, the University of Saarland (Saarbrucken, Germany), the Leibniz Institute (Leipzig, Germany), INTEMA (Mar del Plata, Argentina) and the ...
Influence of the silicon interlayer deposition process in the adhesion of the DLC coatings deposited on nitrided martensitic stainless steel
(2017-08-25)
The DLC coatings are characterized by good wear resistance, low friction coefficient and chemical
inertness [1]. However, they have adhesion problems when they are deposited on metallic substrates. For this reason, a thin ...
Microstructure and wear behavior of TiN coatings deposited on nitrided stainless steel by PBII&D
(2017-09-14)
This work presents the wear behavior of TiN coatings obtained by cathodic arc discharge combined with implantation and temperature on AISI 316L stainless steel previously ion nitrided.