Listar Facultad Regional Venado Tuerto por título
Mostrando ítems 193-212 de 273
-
Obtención de las curvas intensidad -duración- frecuencia para la ciudad de Venado Tuerto.
(UTN FRVT, 2016-03)El presente trabajo tiene por finalidad la obtención de las Curvas I-D-F para la Ciudad de Venado Tuerto. En la creación de las mismas, se utilizaron dos metodologías distintas. La primera metodología, estuvo basada en ... -
On the Double-Arcing Phenomenon in a Cutting Arc Torch.
(2011)Transferred arc plasma torches are widely used in industrial cutting process of metallic materials because of their ability to cut almost any metal and the very high productivity that can be achieved with this technology ... -
On the dynamic behavior of the anode–arc–root at the nozzle surface in a non-transferred plasma torch
(2012)The dynamic behavior of the anode–arc–root at the nozzle surface of a plasma torch was experimentally investigated in this work. A gas (N2) vortex–stabilized non–transferred arc torch with a thoriated tungsten rod (2wt ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
(ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
(2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ... -
On the influence of the nozzle length on the arc properties in a cutting torch
(2009)In this work, an experimental study on the influence of the nozzle geometry on the physical properties of a cutting arc is reported. Ion current signals collected by an electrostatic probe sweeping across a 30 A oxygen ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
(2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ... -
On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime
(2015-02-06)Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the ... -
On the reduction of the third-order harmonic losses in low–voltage power cables used for feeding large LED and CFL lighting loads.
(2017)An experimental investigation of diversity factors for LED (light emitting diode) in combination with CFL (compact fluorescent lamps) and LED lamps is presented in this paper. Attention was paid to the reduction of ... -
On the space-charge boundary layer inside the nozzle of a cutting torch.
(2009)A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type ... -
On the Use of Sweeping Langmuir Probes in Cutting Arc Plasmas—Part I: Experimental Results.
(2008)The first study of Langmuir probes applied to cut ting arcs using a sweeping-probe system is presented. It is found that, under a relatively broad range of experimental conditions (changes in the probe material, in the ... -
On the Use of Sweeping Langmuir Probes in Cutting-Arc Plasmas—Part II: Interpretation of the Results.
(2008)A semiempirical Langmuir probe model is intro duced that is particularly adapted to high-energy-density cutting arcs, for which, as we have shown in Part I, the ion current collected by negatively biased probes shows no ... -
On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortexstabilized nitrogen plasma jet.
(2014)Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type ... -
On the use of the metallic nozzle of a cutting arc torch as a Langmuir probe.
(2008)The region inside the nozzle (bore diameter ≈1 mm) of a cutting arc torch is inaccessible to most plasma diagnostics, and numerical simulations are the only means to find out the relative importance of several physical ... -
On the use of the Prandtl mixing length model in the cutting torch modeling.
(2011-05-25)The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient ... -
El pellet de marlo como vector energético.
(UTN FRVT, 2018-10-19)El presente trabajo detalla la utilización del pellet de marlo como vector energético. Se sabe que el marlo es un buen combustible pero su bajo peso específico hace que su traslado sea poco rentable, por lo que para ... -
Physicochemical Properties and Time Stability of Plasma Activated Water by a Liquid-Cathode Glow-Type Discharge in Air: The Effect of Air Confinement.
(2023)Nonthermal discharges in atmospheric pressure air in contact with water produce large amounts of reactive species in the gas phase that can enter into the water by diffusion, thus inducing the formation of secondary ... -
Planta acondicionamiento de espigas de maíz.
(UTN FRVT, 2010)Venado Tuerto y su región se encuentran íntegramente comprendidos dentro de la Región de La Pampa Húmeda y en el área del territorio nacional con el más alto grado de desarrollo agrícola. Su posición casi central la vincula ... -
Planta de acondicionamiento y acopio de cereal.
(UTN FRVT, 2002-12-06)El presente proyecto tiene como objetivo central una planta de almacenamiento y acondicionamiento de granos, definiéndose a las mismas como el espacio físico que brinda la recepción de mercadería cosechada, acondicionamiento ...