Facultad Regional Venado Tuerto: Materiales subidos recientemente
Mostrando ítems 41-60 de 273
-
Cathode-sheath model for field emission sustained atmospheric pressure discharges
(2021)The cathode-sheath region of a discharge in atmospheric pressure air with a flat copper cathode is numerically investigated by using a simple fluid model that takes into account non-local ionization. The effects of the ... -
Schlieren technique applied to the arc temperature measurement in a high energy density cutting torch.
(2010)Plasma temperature and radial density profiles of the plasma species in a high energy density cutting arc have been obtained by using a quantitative schlieren technique. A Z-type two-mirror schlieren system was used in ... -
Departures from local thermodynamic equilibrium in cutting arc plasmas derived from electron and gas density measurements using a twowavelength quantitative Schlieren technique.
(2011)A two-wavelength quantitative Schlieren technique that allows inferring the electron and gas densities of axisymmetric arc plasmas without imposing any assumption regarding statistical equilibrium models is reported. ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
Resistencia a la compresión paralela en madera laminada encolada de Álamo.
(2023)Las nuevas tecnologías de fabricación e industrialización de elementos estructurales de madera laminada encolada permiten abordar diseños de construcciones civiles de grandes luces, capaces de competir en prestaciones ... -
Uniones en madera de ARAUCARIA ANGUSTIFOLIA: valores de resistencia al aplastamiento.
(2024)En la construcción con madera, conocer la capacidad portante de las uniones es un requisito indispensable para garantizar la estabilidad estructural del conjunto. Para su cálculo, por cualquiera de los métodos vigentes, ... -
Langmuir probe measurements in a time-fluctuating-highly ionized non-equilibrium cutting arc: Analysis of the electron retarding part of the time-averaged current-voltage characteristic of the probe.
(2013)This work describes the application of Langmuir probe diagnostics to the measurement of the electron temperature in a time-fluctuating-highly ionized, non-equilibrium cutting arc. The electron retarding part of the ... -
On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortexstabilized nitrogen plasma jet.
(2014)Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type ... -
Numerical investigation of the double-arcing phenomenon in a cutting arc torch.
(2014)A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the ... -
Calculation of harmonic losses and ampacity in low-voltage power cables when used for feeding large LED lighting loads.
(2014)A numerical investigation on the harmonic disturbances in low-voltage cables feeding large LED loads is reported. A frequency domain analysis on several commercially available LEDs was performed to investigate the ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
(2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ... -
Modelling of an Atmospheric Pressure Nitrogen Glow Discharge Operating in High-Gas Temperature Regimes.
(2016)A model of an atmospheric pressure nitrogen glow discharge in high-gas tem perature regimes is developed. The model considers a fairly complete set of chemical reactions, including several processes with the participation ... -
Ambient Species Density and Gas Temperature Radial Profiles Derived from a Schlieren Technique in a Low Frequency Non-thermal Oxygen Plasma Jet.
(2017)A quantitative interpretation of the schlieren technique applied to a non-thermal atmospheric-pressure oxygen plasma jet driven at low-frequency (50 Hz) is reported. The jet was operated in the turbulent regime with a ... -
Modelling of the Plasma–Sheath Boundary Region in Wall-Stabilized Arc Plasmas: Unipolar Discharge Properties.
(2017)A two-dimensional model of the non-equilibrium unipolar discharge occurring in the plasma–sheath boundary region of a transferred-arc was developed. This model was used to study the current transfer to the nozzle (1 mm ... -
Experimental Characterization of a Low-Current Cutting Torch.
(2004)An experimental characterization of a low-current (30-40 A) cutting torch is presented. To avoid contamination of the plasma arc by removed anode material, a rotating steel cylinder was used as the anode and the arc ... -
Hydrodynamic Model for the Plasma-Gas Flow in a Cutting Torch Nozzle.
(2004)We present a simple hydrodynamic model to obtain the profiles of the relevant physical quantities along a nozzle of arbitrary cross-section in a cutting torch. The model uses a two-zone approximation (a hot central ... -
On the Use of Sweeping Langmuir Probes in Cutting-Arc Plasmas—Part II: Interpretation of the Results.
(2008)A semiempirical Langmuir probe model is intro duced that is particularly adapted to high-energy-density cutting arcs, for which, as we have shown in Part I, the ion current collected by negatively biased probes shows no ... -
On the Use of Sweeping Langmuir Probes in Cutting Arc Plasmas—Part I: Experimental Results.
(2008)The first study of Langmuir probes applied to cut ting arcs using a sweeping-probe system is presented. It is found that, under a relatively broad range of experimental conditions (changes in the probe material, in the ... -
On the use of the metallic nozzle of a cutting arc torch as a Langmuir probe.
(2008)The region inside the nozzle (bore diameter ≈1 mm) of a cutting arc torch is inaccessible to most plasma diagnostics, and numerical simulations are the only means to find out the relative importance of several physical ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
(2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ...