Show simple item record

dc.creatorVottero, S.
dc.creatorDíaz, F.V.
dc.creatorMammana, C.A
dc.creatorGuidobono, A. P. M.
dc.date.accessioned2019-05-13T22:08:38Z
dc.date.available2019-05-13T22:08:38Z
dc.date.issued2017-03-15
dc.identifier.citationResearch Journal of Applied Sciences, Engineering and Technology 14(3): 119-123, 2017es_ES
dc.identifier.urihttp://hdl.handle.net/20.500.12272/3585
dc.description.abstractThe purpose of this study is to evaluate, from high speed machining tests, the behavior of the residual stresses induced in samples of AA 6082-T6 and AA 7075-T6 aluminum alloys. This study includes an exhaustive analysis of residual stress anisotropy from diameters of Mohr's circles. The combination of process parameters was modified in order to evaluate the stress changes introduced in different zones of the surfaces generated. A method of micro-indents, which includes the adaptation of a universal measuring machine, was used to determine, with high accuracy, the normal components of residual stress in several directions. The obtained results reveal that although, in the alloy 7075-T6, the normal components are lower, in the alloy 6082-T6, these normal components tend to be grouped into smaller intervals and also, to show a more homogeneous directional behavior when the cutting conditions are more severe.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectAluminum alloys, high speed machining, indent method, Mohr's circle, residual stresseses_ES
dc.subjectHigh speed machininges_ES
dc.subjectindent method,es_ES
dc.subjectMohr's circlees_ES
dc.subjectresidual stresseses_ES
dc.titleAnalysis of Residual Stresses in High Speed Milled Aluminum Alloyses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.rights.holder© 2017 Maxwell Scientific Organization Corpes_ES
dc.description.affiliationFil: Vottero, S. Departamento de Ingeniería Electromecánica-Departamento de Ingeniería Industrial, Facultad Regional Rafaela, Universidad Tecnológica Nacional, Acuña 49, 2300 Rafaela, Argentinaes_ES
dc.description.affiliationFil: Diaz, F. V. Departamento de Ingeniería Electromecánica-Departamento de Ingeniería Industrial, Facultad Regional Rafaela, Universidad Tecnológica Nacional, Acuña 49, 2300 Rafaela, Argentinaes_ES
dc.description.affiliationFil: Mammana, C.A. Departamento de Ingeniería Electromecánica-Departamento de Ingeniería Industrial, Facultad Regional Rafaela, Universidad Tecnológica Nacional, Acuña 49, 2300 Rafaela, Argentinaes_ES
dc.description.affiliationFil: Guidobono, A.P.M. 2División Metrología Dimensional, Centro Regional Rosario (INTI), Ocampo y Esmeralda, 2000 Rosario, Argentinaes_ES
dc.description.peerreviewedPeer Reviewedes_ES
dc.type.versioninfo:eu-repo/semantics/publishedVersiones_ES
dc.type.snrdinfo:ar-repo/semantics/artículoes_ES
dc.relation.referencesDOI:10.19026/rjaset.14.4154es_ES
dc.rights.useSu utilización debe ser acompañada por l cita bibliográfica con reconocimiento de la fuentees_ES
dc.rights.useAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.identifier.doi10.19026/rjaset.14.4154


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess