Listar FRVT - Producción Científica por título
Mostrando ítems 57-76 de 99
-
Metodologías SIG para la elaboración de indicadores de arbolado urbano: caso de aplicación B° Norte, Venado Tuerto.
(UTN FRVT, 2021-10-06)La urbanización es uno de los grandes responsables de la reducción y pérdida de los ecosistemas, siendo un claro ejemplo el desplazamiento de los árboles mediante el avance de las construcciones. Debido a los grandes ... -
“Una mirada desde los docentes de la Universidad Tecnológica Nacional sobre el desarrollo de las competencias políticas, sociales y actitudinales en carreras de ingeniería”.
(FRVT, 2022-09)La sociedad actual plantea nuevos paradigmas a la universidad en general y, en particular, para aquellas casas de altos estudios que forman ingenieros. Actualmente la modalidad de pensamiento lógico-científico tradicional ... -
Modelling of an Atmospheric Pressure Nitrogen Glow Discharge Operating in High-Gas Temperature Regimes.
(2016)A model of an atmospheric pressure nitrogen glow discharge in high-gas tem perature regimes is developed. The model considers a fairly complete set of chemical reactions, including several processes with the participation ... -
Modelling of an Atmospheric–Pressure Air Glow Discharge Operating in High–Gas Temperature Regimes: The Role of the Associative Ionization Reactions Involving Excited Atoms.
(2020)A model of a stationary glow-type discharge in atmospheric-pressure air operated in high-gas-temperature regimes (1000 K < Tg < 6000 K), with a focus on the role of associative ionization reactions involving N(2D,2P)-excited ... -
Modelling of the Plasma–Sheath Boundary Region in Wall-Stabilized Arc Plasmas: Unipolar Discharge Properties.
(2017)A two-dimensional model of the non-equilibrium unipolar discharge occurring in the plasma–sheath boundary region of a transferred-arc was developed. This model was used to study the current transfer to the nozzle (1 mm ... -
Non-thermal plasma application improves germination, establishment and productivity of Gatton panic grass (Megathyrsus maximus) without compromising forage quality.
(2022)Megathyrsus maximus (Gatton panic) is a tropical grass highly valued both for its use as forage and for its biofuel potential. A major constraint in establishing pastures of this cultivar is the low viability and germination ... -
Non-thermal plasma as emerging technology for Tribolium castaneum pest-management in stored grains and flours.
(2022)The red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), is a major secondary pest on wheat stored in metal bins, silo-bags and is also frequently found in wheat products such as flour. Non-thermal ... -
Non‑Thermal Plasmas Afect Plant Growth and DNA Methylation Patterns in Glycine max.
(2021)Non-thermal plasmas (NTP) are partially ionized gases that represent a promising technology for seed treatment to enhance seed health while promoting germination and vigor in a fast, cost-efective, and eco-friendly way. ... -
Normalización de la madera pino Ponderosa.
(2020)El pino ponderosa, la especie forestal más plantada en Norpatagonia, acaba de ser incorporada en los Suplementos del Reglamento Argentino de Estructuras de Madera (INTI-CIRSOC 601) y por lo tanto tiene el aval normativo ... -
Numerical investigation of the double-arcing phenomenon in a cutting arc torch.
(2014)A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the ... -
Numerical Modelling of a Cutting Arc Torch
(Jan Awrejcewicz. INTECH, 2014-02-14)Plasma cutting is a process of metal cutting at atmospheric pressure by an arc plasma jet, where a transferred arc is generated between a cathode and a work-piece (the metal to be cut) acting as the anode . Small nozzle ... -
On the Double-Arcing Phenomenon in a Cutting Arc Torch.
(2011)Transferred arc plasma torches are widely used in industrial cutting process of metallic materials because of their ability to cut almost any metal and the very high productivity that can be achieved with this technology ... -
On the dynamic behavior of the anode–arc–root at the nozzle surface in a non-transferred plasma torch
(2012)The dynamic behavior of the anode–arc–root at the nozzle surface of a plasma torch was experimentally investigated in this work. A gas (N2) vortex–stabilized non–transferred arc torch with a thoriated tungsten rod (2wt ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
(ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
(2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ... -
On the influence of the nozzle length on the arc properties in a cutting torch
(2009)In this work, an experimental study on the influence of the nozzle geometry on the physical properties of a cutting arc is reported. Ion current signals collected by an electrostatic probe sweeping across a 30 A oxygen ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
(2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ... -
On the physical processes ruling an atmospheric pressure air glow discharge operating in an intermediate current regime
(2015-02-06)Low-frequency (100 Hz), intermediate-current (50 to 200 mA) glow discharges were experimentally investigated in atmospheric pressure air between blunt copper electrodes. Voltage–current characteristics and images of the ... -
On the space-charge boundary layer inside the nozzle of a cutting torch.
(2009)A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type ...