Listar FRVT - Artículos en Revistas por título
Mostrando ítems 17-36 de 55
-
Hydrodynamic Model for the Plasma-Gas Flow in a Cutting Torch Nozzle.
(2004)We present a simple hydrodynamic model to obtain the profiles of the relevant physical quantities along a nozzle of arbitrary cross-section in a cutting torch. The model uses a two-zone approximation (a hot central ... -
Improvement of growth and yield of soybean plants through the application of non-thermal plasmas to seeds with different health status.
(2019)Soybean (Glycine max (L.) Merrill) is a globally important crop, providing oil and protein. Diaporthe/Phomopsis complex includes seed-borne pathogens that affect this legume. Non-thermal plasma treatment is a fast, ... -
Indigo Carmine Degradation in Water Induced by a Pulsed Positive Corona Discharge in Air: Discharge and Postdischarge Effects.
(2022)In recent years, one of the fastest growing technological applications in the field of nonthermal plasmas is the degradation of organic contaminants of water. In this work, the degradation of indigo carmine (IC) in water ... -
Influencia de las dimensiones de la sección transversal sobre la resistencia a flexión en madera aserrada de Populus Deltoides cultivado en Argentina.
(2016)En el artículo se analiza el efecto de las dimensiones de la sección transversal sobre la resistencia a flexión en piezas de madera aserrada de Populus deltoides ‘Australiano 129/60’ y ‘Stoneville 67’, cultivados en ... -
Investigation of the relevant kinetic processes in the initial stage of a double-arcing instability in oxygen plasmas.
(2018)A numerical investigation of the kinetic processes in the initial (nanosecond range) stage of the double-arcing instability was developed. The plasma-sheath boundary region of an oxygen operated cutting torch was considered. ... -
Langmuir probe diagnostics of an atmospheric pressure, vortex–stabilized nitrogen plasma jet
(2012-09-19)Langmuir probe measurements in an atmospheric pressure direct current (dc) plasma jet are reported. Sweeping probes were used. The experiment was carried out using a dc non–transferred arc torch with a rod–type cathode ... -
Langmuir probe measurements in a time-fluctuating-highly ionized non-equilibrium cutting arc: Analysis of the electron retarding part of the time-averaged current-voltage characteristic of the probe.
(2013)This work describes the application of Langmuir probe diagnostics to the measurement of the electron temperature in a time-fluctuating-highly ionized, non-equilibrium cutting arc. The electron retarding part of the ... -
Medición de humedades en madera con Xilohigrómetros, comparación y corrección.
(edUTecNe, 2013)El trabajo presenta la comparación de mediciones de humedad en la madera de dos xilohigrómetros diferentes con la real obtenida según lo estipula la norma IRAM 9532, para determinar el error de su lectura y obtener una ... -
Modelling of an Atmospheric Pressure Nitrogen Glow Discharge Operating in High-Gas Temperature Regimes.
(2016)A model of an atmospheric pressure nitrogen glow discharge in high-gas tem perature regimes is developed. The model considers a fairly complete set of chemical reactions, including several processes with the participation ... -
Modelling of an Atmospheric–Pressure Air Glow Discharge Operating in High–Gas Temperature Regimes: The Role of the Associative Ionization Reactions Involving Excited Atoms.
(2020)A model of a stationary glow-type discharge in atmospheric-pressure air operated in high-gas-temperature regimes (1000 K < Tg < 6000 K), with a focus on the role of associative ionization reactions involving N(2D,2P)-excited ... -
Modelling of the Plasma–Sheath Boundary Region in Wall-Stabilized Arc Plasmas: Unipolar Discharge Properties.
(2017)A two-dimensional model of the non-equilibrium unipolar discharge occurring in the plasma–sheath boundary region of a transferred-arc was developed. This model was used to study the current transfer to the nozzle (1 mm ... -
Non-thermal plasma application improves germination, establishment and productivity of Gatton panic grass (Megathyrsus maximus) without compromising forage quality.
(2022)Megathyrsus maximus (Gatton panic) is a tropical grass highly valued both for its use as forage and for its biofuel potential. A major constraint in establishing pastures of this cultivar is the low viability and germination ... -
Non-thermal plasma as emerging technology for Tribolium castaneum pest-management in stored grains and flours.
(2022)The red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), is a major secondary pest on wheat stored in metal bins, silo-bags and is also frequently found in wheat products such as flour. Non-thermal ... -
Non‑Thermal Plasmas Afect Plant Growth and DNA Methylation Patterns in Glycine max.
(2021)Non-thermal plasmas (NTP) are partially ionized gases that represent a promising technology for seed treatment to enhance seed health while promoting germination and vigor in a fast, cost-efective, and eco-friendly way. ... -
Normalización de la madera pino Ponderosa.
(2020)El pino ponderosa, la especie forestal más plantada en Norpatagonia, acaba de ser incorporada en los Suplementos del Reglamento Argentino de Estructuras de Madera (INTI-CIRSOC 601) y por lo tanto tiene el aval normativo ... -
Numerical investigation of the double-arcing phenomenon in a cutting arc torch.
(2014)A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the ... -
Numerical Simulation of the Voltage–Current Characteristic of an Atmospheric Pressure Discharge: The Glow‑to‑Arc Transition.
(2024)The glow-to-arc transition of a convection-stabilized atmospheric pressure air discharge is numerically investigated. Two separate models are considered: a one-dimensional axisym metric time-dependent fuid model of the ... -
On the dynamic behavior of the anode–arc–root at the nozzle surface in a non-transferred plasma torch
(2012)The dynamic behavior of the anode–arc–root at the nozzle surface of a plasma torch was experimentally investigated in this work. A gas (N2) vortex–stabilized non–transferred arc torch with a thoriated tungsten rod (2wt ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
(ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ...