Listar FRVT - Artículos en Revistas por fecha de publicación
Mostrando ítems 1-20 de 43
-
Experimental Characterization of a Low-Current Cutting Torch.
(2004)An experimental characterization of a low-current (30-40 A) cutting torch is presented. To avoid contamination of the plasma arc by removed anode material, a rotating steel cylinder was used as the anode and the arc ... -
Hydrodynamic Model for the Plasma-Gas Flow in a Cutting Torch Nozzle.
(2004)We present a simple hydrodynamic model to obtain the profiles of the relevant physical quantities along a nozzle of arbitrary cross-section in a cutting torch. The model uses a two-zone approximation (a hot central ... -
On the use of the metallic nozzle of a cutting arc torch as a Langmuir probe.
(2008)The region inside the nozzle (bore diameter ≈1 mm) of a cutting arc torch is inaccessible to most plasma diagnostics, and numerical simulations are the only means to find out the relative importance of several physical ... -
On the Use of Sweeping Langmuir Probes in Cutting-Arc Plasmas—Part II: Interpretation of the Results.
(2008)A semiempirical Langmuir probe model is intro duced that is particularly adapted to high-energy-density cutting arcs, for which, as we have shown in Part I, the ion current collected by negatively biased probes shows no ... -
On the Use of Sweeping Langmuir Probes in Cutting Arc Plasmas—Part I: Experimental Results.
(2008)The first study of Langmuir probes applied to cut ting arcs using a sweeping-probe system is presented. It is found that, under a relatively broad range of experimental conditions (changes in the probe material, in the ... -
On the space-charge boundary layer inside the nozzle of a cutting torch.
(2009)A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type ... -
On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch.
(2009)The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was ... -
An Interpretation of Langmuir Probe Floating Voltage Signals in a Cutting Arc.
(2009)An experimental study of the electrostatic probe floating voltage signals in a cutting arc and its physical interpre tation in terms of the arc plasma structure is reported. Sweeping electrostatic probes have been used ... -
Schlieren technique applied to the arc temperature measurement in a high energy density cutting torch.
(2010)Plasma temperature and radial density profiles of the plasma species in a high energy density cutting arc have been obtained by using a quantitative schlieren technique. A Z-type two-mirror schlieren system was used in ... -
Departures from local thermodynamic equilibrium in cutting arc plasmas derived from electron and gas density measurements using a twowavelength quantitative Schlieren technique.
(2011)A two-wavelength quantitative Schlieren technique that allows inferring the electron and gas densities of axisymmetric arc plasmas without imposing any assumption regarding statistical equilibrium models is reported. ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
(2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the use of the Prandtl mixing length model in the cutting torch modeling.
(2011-05-25)The Prandtl mixing length model has been used to take into account the turbulent effects in a 30 A high-energy density cutting torch model. In particular, the model requires the introduction of only one adjustable coefficient ... -
Correlation methods in cutting arcs
(IOPscience, 2011-05-25)The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
(ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
Langmuir probe diagnostics of an atmospheric pressure, vortex–stabilized nitrogen plasma jet
(2012-09-19)Langmuir probe measurements in an atmospheric pressure direct current (dc) plasma jet are reported. Sweeping probes were used. The experiment was carried out using a dc non–transferred arc torch with a rod–type cathode ... -
Langmuir probe measurements in a time-fluctuating-highly ionized non-equilibrium cutting arc: Analysis of the electron retarding part of the time-averaged current-voltage characteristic of the probe.
(2013)This work describes the application of Langmuir probe diagnostics to the measurement of the electron temperature in a time-fluctuating-highly ionized, non-equilibrium cutting arc. The electron retarding part of the ... -
Medición de humedades en madera con Xilohigrómetros, comparación y corrección.
(edUTecNe, 2013)El trabajo presenta la comparación de mediciones de humedad en la madera de dos xilohigrómetros diferentes con la real obtenida según lo estipula la norma IRAM 9532, para determinar el error de su lectura y obtener una ... -
Calculation of harmonic losses and ampacity in low-voltage power cables when used for feeding large LED lighting loads.
(2014)A numerical investigation on the harmonic disturbances in low-voltage cables feeding large LED loads is reported. A frequency domain analysis on several commercially available LEDs was performed to investigate the ... -
On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortexstabilized nitrogen plasma jet.
(2014)Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N2 gas flow rate of 25 Nl/min, thoriated tungsten rod-type ...