Listar FRVT - Artículos en Revistas Internacionales por autor "Kelly, Héctor"
Mostrando ítems 1-20 de 31
-
Ambient Species Density and Gas Temperature Radial Profiles Derived from a Schlieren Technique in a Low Frequency Non-thermal Oxygen Plasma Jet.
Chamorro, Juan Camilo; Prevosto, Leandro; Cejas, Ezequiel; Kelly, Héctor; Mancinelli, Beatriz; Fischfeld, Gerardo (2017)A quantitative interpretation of the schlieren technique applied to a non-thermal atmospheric-pressure oxygen plasma jet driven at low-frequency (50 Hz) is reported. The jet was operated in the turbulent regime with a ... -
An Interpretation of Langmuir Probe Floating Voltage Signals in a Cutting Arc.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2009)An experimental study of the electrostatic probe floating voltage signals in a cutting arc and its physical interpre tation in terms of the arc plasma structure is reported. Sweeping electrostatic probes have been used ... -
Correlation methods in cutting arcs
Prevosto, Leandro; Kelly, Héctor (IOPscience, 2011-05-25)The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical ... -
Departures from local thermodynamic equilibrium in cutting arc plasmas derived from electron and gas density measurements using a twowavelength quantitative Schlieren technique.
Prevosto, Leandro; Artana, Guillermo; Kelly, Héctor; Mancinelli, Beatriz (2011)A two-wavelength quantitative Schlieren technique that allows inferring the electron and gas densities of axisymmetric arc plasmas without imposing any assumption regarding statistical equilibrium models is reported. ... -
Determination of plasma velocity from light fluctuations in a cutting torch.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2009) -
Diagnostics of cutting arc plasmas.
Prevosto, Leandro; Kelly, Héctor (2014)An over-view of several remote and invasive diagnostics to characterize cutting arcs at the nozzle exit-anode gap as well as inside the nozzle is reported. A briefly description of the experimental set-ups, together with ... -
Effects of non–thermal plasmas on seed-borne Diaporthe/Phomopsis complex and germination parameters of soybean seeds.
Pérez Pizá, María Cecilia; Prevosto, Leandro; Zilli, Carla; Cejas, Ezequiel; Kelly, Héctor; Balestrasse, Karina (2018)Diaporthe/Phomopsis (D/P) is a complex of seed-borne fungi that severely affects soybean (Glycine max (L.) Merrill), one of the most important crops worldwide. Non-thermal plasma treatment is a fast, economic and ... -
Experimental Characterization of a Low-Current Cutting Torch.
Kelly, Héctor; Mancinelli, Beatriz; Prevosto, Leandro; Minotti, Fernando; Márquez, Andrés (2004)An experimental characterization of a low-current (30-40 A) cutting torch is presented. To avoid contamination of the plasma arc by removed anode material, a rotating steel cylinder was used as the anode and the arc ... -
Hydrodynamic Model for the Plasma-Gas Flow in a Cutting Torch Nozzle.
Kelly, Héctor; Minotti, Fernando; Prevosto, Leandro; Mancinelli, Beatriz (2004)We present a simple hydrodynamic model to obtain the profiles of the relevant physical quantities along a nozzle of arbitrary cross-section in a cutting torch. The model uses a two-zone approximation (a hot central ... -
Interpretation of Voltage Measurements in Cutting Torches.
Prevosto, Leandro; Kelly, Héctor; Minotti, Fernando Oscar; Mancinelli, Beatriz; https://orcid.org/0000-0002-8771-9549; https://orcid.org/0000-0003-0577-9589 (2015)Anode-cathode and nozzle-cathode voltages, plenum pressure and gas mass flow measurements in a low current (30 A) cutting torch, operated with oxygen gas, are used as inputs for an electrical model coupled to a simplified ... -
Investigation of the relevant kinetic processes in the initial stage of a double-arcing instability in oxygen plasmas.
Mancinelli, Beatriz; Prevosto, Leandro; Chamorro, Juan Camilo; Minotti, Fernando; Kelly, Héctor (2018)A numerical investigation of the kinetic processes in the initial (nanosecond range) stage of the double-arcing instability was developed. The plasma-sheath boundary region of an oxygen operated cutting torch was considered. ... -
Langmuir probe diagnostics of an atmospheric pressure, vortex–stabilized nitrogen plasma jet
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2012-09-19)Langmuir probe measurements in an atmospheric pressure direct current (dc) plasma jet are reported. Sweeping probes were used. The experiment was carried out using a dc non–transferred arc torch with a rod–type cathode ... -
Langmuir probe measurements in a time-fluctuating-highly ionized non-equilibrium cutting arc: Analysis of the electron retarding part of the time-averaged current-voltage characteristic of the probe.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2013)This work describes the application of Langmuir probe diagnostics to the measurement of the electron temperature in a time-fluctuating-highly ionized, non-equilibrium cutting arc. The electron retarding part of the ... -
Modelling of an Atmospheric Pressure Nitrogen Glow Discharge Operating in High-Gas Temperature Regimes.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2016)A model of an atmospheric pressure nitrogen glow discharge in high-gas tem perature regimes is developed. The model considers a fairly complete set of chemical reactions, including several processes with the participation ... -
Modelling of the Plasma–Sheath Boundary Region in Wall-Stabilized Arc Plasmas: Unipolar Discharge Properties.
Mancinelli, Beatriz; Prevosto, Leandro; Chamorro, Juan Camilo; Minotti, Fernando; Kelly, Héctor (2017)A two-dimensional model of the non-equilibrium unipolar discharge occurring in the plasma–sheath boundary region of a transferred-arc was developed. This model was used to study the current transfer to the nozzle (1 mm ... -
Numerical investigation of the double-arcing phenomenon in a cutting arc torch.
Mancinelli, Beatriz; Minotti, Fernando; Prevosto, Leandro; Kelly, Héctor (2014)A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the ... -
On the dynamic behavior of the anode–arc–root at the nozzle surface in a non-transferred plasma torch
Prevosto, Leandro; Risso, Marcelo Natalio; Infante, Damián Leandro; Cejas, Ezequiel; Kelly, Héctor; Mancinelli, Beatriz (2012)The dynamic behavior of the anode–arc–root at the nozzle surface of a plasma torch was experimentally investigated in this work. A gas (N2) vortex–stabilized non–transferred arc torch with a thoriated tungsten rod (2wt ... -
On the dynamics of cutting arc plasmas: the role of the power supply ripple
Prevosto, Leandro; Mancinelli, Beatriz; Kelly, Héctor (ADVANCED ELECTROMAGNETICS, 2012-08)The power sources used in cutting arc torches are usually poorly stabilized and have a large ripple factor. The strong oscillatory components in the voltage and arc current produce in turn, large fluctuations in the plasma ... -
On the dynamics of the space-charge layer inside the nozzle of a cutting torch and its relation with the “non-destructive” double-arcing phenomenon
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz (2011)Experimental observations on the plasma dynamics inside the nozzle of a 30 A oxygen cutting torch operated at conditions close to the double arcing are reported. It is employed a technique previously developed in our ... -
On the Gas Heating Mechanism for the Fast Anode Arc Reattachment in a Non-transferred Arc Plasma Torch Operating with Nitrogen Gas in the Restrike Mode.
Prevosto, Leandro; Kelly, Héctor; Mancinelli, Beatriz; Chamorro, Juan Camilo (2015)The present work provides a detailed kinetic analysis of the time-resolved dynamics of the gas heating during the arc reattachment in nitrogen gas in order to understand the main processes leading to such a fast reattachment. ...