Listar FRVT - Artículos en Revistas Internacionales por título
Mostrando ítems 1-20 de 52
-
Ambient Species Density and Gas Temperature Radial Profiles Derived from a Schlieren Technique in a Low Frequency Non-thermal Oxygen Plasma Jet.
(2017)A quantitative interpretation of the schlieren technique applied to a non-thermal atmospheric-pressure oxygen plasma jet driven at low-frequency (50 Hz) is reported. The jet was operated in the turbulent regime with a ... -
An Interpretation of Langmuir Probe Floating Voltage Signals in a Cutting Arc.
(2009)An experimental study of the electrostatic probe floating voltage signals in a cutting arc and its physical interpre tation in terms of the arc plasma structure is reported. Sweeping electrostatic probes have been used ... -
Calculation of harmonic losses and ampacity in low-voltage power cables when used for feeding large LED lighting loads.
(2014)A numerical investigation on the harmonic disturbances in low-voltage cables feeding large LED loads is reported. A frequency domain analysis on several commercially available LEDs was performed to investigate the ... -
Cathode-sheath model for field emission sustained atmospheric pressure discharges
(2021)The cathode-sheath region of a discharge in atmospheric pressure air with a flat copper cathode is numerically investigated by using a simple fluid model that takes into account non-local ionization. The effects of the ... -
Cathode-sheath model for field emission sustained atmospheric pressure discharges.
(2021-03-16)The cathode-sheath region of a discharge in atmospheric pressure air with a flat copper cathode is numerically investigated by using a simple fluid model that takes into account non-local ionization. The effects of the ... -
Correlation methods in cutting arcs
(IOPscience, 2011-05-25)The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical ... -
Departures from local thermodynamic equilibrium in cutting arc plasmas derived from electron and gas density measurements using a twowavelength quantitative Schlieren technique.
(2011)A two-wavelength quantitative Schlieren technique that allows inferring the electron and gas densities of axisymmetric arc plasmas without imposing any assumption regarding statistical equilibrium models is reported. ... -
Diagnostics of cutting arc plasmas.
(2014)An over-view of several remote and invasive diagnostics to characterize cutting arcs at the nozzle exit-anode gap as well as inside the nozzle is reported. A briefly description of the experimental set-ups, together with ... -
Effect of in–package cold plasma treatments on the quality of minimally processed apples.
(2023)Cold plasma technology is being increasingly used for food preservation and, incipiently, for minimal processing of fruit. Therefore, the objective of this work was to study the effect of in-package cold plasma (generated ... -
Effects of non-thermal plasma technology on Diaporthe longicolla cultures and mechanisms involved.
(2021-01-05)BACKGROUND: The Diaporthe/Phomopsis complex (D/P) is a group of soybean seed-borne fungi. The use of chemical fungicides, either for seed treatment or during the crop cycle, is the most adopted practice for treating fungal ... -
Effects of non–thermal plasmas on seed-borne Diaporthe/Phomopsis complex and germination parameters of soybean seeds.
(2018)Diaporthe/Phomopsis (D/P) is a complex of seed-borne fungi that severely affects soybean (Glycine max (L.) Merrill), one of the most important crops worldwide. Non-thermal plasma treatment is a fast, economic and ... -
Effects of the Plasma-Activated Water on the Quality and Preservation of Fresh-Cut Lettuce.
(2023)— The effect of the application of plasma-activated water (PAW) on the quality and preservation of fresh-cut lettuce is reported in this article. PAW was produced by using a liquid cathode air discharge. The average ... -
Enhancement of soybean nodulation by seed treatment with non–thermal plasmas
(2020-03-18)Soybean (Glycine max (L.) Merrill) is one of the most important crops worldwide providing dietary protein and vegetable oil. Most of the nitrogen required by the crop is supplied through biological N2 fxation. Non-thermal ... -
Experimental Characterization of a Low-Current Cutting Torch.
(2004)An experimental characterization of a low-current (30-40 A) cutting torch is presented. To avoid contamination of the plasma arc by removed anode material, a rotating steel cylinder was used as the anode and the arc ... -
Glow Discharge in a High-Velocity Air Flow: The Role of the Associative Ionization Reactions Involving Excited Atoms.
(2019)A kinetic scheme for non-equilibrium regimes of atmospheric pressure air discharges is developed. A distinctive feature of this model is that it includes associative ionization with the participation of N(2D, 2P) atoms. ... -
Hydrodynamic Model for the Plasma-Gas Flow in a Cutting Torch Nozzle.
(2004)We present a simple hydrodynamic model to obtain the profiles of the relevant physical quantities along a nozzle of arbitrary cross-section in a cutting torch. The model uses a two-zone approximation (a hot central ... -
Improvement of growth and yield of soybean plants through the application of non-thermal plasmas to seeds with different health status.
(2019)Soybean (Glycine max (L.) Merrill) is a globally important crop, providing oil and protein. Diaporthe/Phomopsis complex includes seed-borne pathogens that affect this legume. Non-thermal plasma treatment is a fast, ... -
Indigo Carmine Degradation in Water Induced by a Pulsed Positive Corona Discharge in Air: Discharge and Postdischarge Effects.
(2022)In recent years, one of the fastest growing technological applications in the field of nonthermal plasmas is the degradation of organic contaminants of water. In this work, the degradation of indigo carmine (IC) in water ... -
Influencia de las dimensiones de la sección transversal sobre la resistencia a flexión en madera aserrada de Populus Deltoides cultivado en Argentina.
(2016)En el artículo se analiza el efecto de las dimensiones de la sección transversal sobre la resistencia a flexión en piezas de madera aserrada de Populus deltoides ‘Australiano 129/60’ y ‘Stoneville 67’, cultivados en ...