Hydrogen incidence on tensile strength behavior of AISI 316L stainless steel
Date
2022-05-13
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Most paper in literature are devoted on the effect caused by chromium carbides on the tensile behavior of stainless steels, for example, it is known that the precipitation of M23C6, M6C and
Sigma Phase are harmful under certain operative conditions, although there are only few papers related with hydrogen embrittlement in type 316L stainless steels. Even though hydrogen slightly modifies the mechanical behavior of these stainless steels, it should be considered to avoid significant economic losses.
The aim of this work is to evaluate the effect on mechanical response of hydrogen charged AISI 316L stainless steel samples. To achieve homogeneous carbides precipitation, specific thermal
treatments were conducted on as-received samples. Then three sets of samples were considered to carry out tensile tests. Before that, a group of heat-treated samples were hydrogen charged, in a 1N H2SO4 electrolytic solution with 0.25 g/L NaAsO2 as hydrogen promoter agent, using graphite anode and a constant current density of 35 mA/cm2 for 3.5 h. After tensile tests, the resulting fracture surfaces exhibited mixed ductile-brittle behavior in hydrogen charged samples in comparison with the ductile morphology obtained in uncharged ones. In addition, in hydrogenated samples cracks were found associated with fine chromium carbides, while ductile well-developed dimples were found in uncharged samples. In coincidence, there was a ductility loss in electrolytic hydrogen charged samples, which was not observed in those uncharged ones. In order to identify hydrogen - carbides interactions, a selective metallographic technique made it possible to find grain boundaries and carbides/matrix interfaces as the main hydrogen traps. Furthermore, differential scanning calorimetry (DSC) tests were performed to obtain hydrogen desorption temperatures. Results allowed to settle that those carbides developed during thermal treatments are responsible for deleterious hydrogen trapping that may cause mechanical failure on AISI 316L stainless steel.
Description
Keywords
Hydrogen, Hidrogeno, Propiedades mecánicas, Mechanical properties, Acero inoxidable, Stainless steel, Carburos, Carbides
Citation
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwised noted, this item's license is described as info:eu-repo/semantics/openAccess