Desarrollo, Producción e Innovación en la Investigación científica
Permanent URI for this communityhttp://48.217.138.120/handle/20.500.12272/2392
Browse
28 results
Search Results
Item Experimental desing optimization of the tetralin hydrogenation over Ir-Pt-SBA-15.(Univesidsad Tecnológica Nacional., 2015) Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma , Brenda CeciliaExperiment design-response surface methodology (RSM) is used in this work to model and optimize two responses in the hydrogenation of tetralin to decalin using bimetallic Ir–Pt-SBA-15 catalyst. In this study, we analyze the influence of the nature of the catalyst (metal molar fraction and metal loading), the catalyst/substrate ratio and the temperature of the reaction as factors for the design. The responses analyzed were conversion at 3 h and at 5 h of reaction time. The response surfaces were obtained with the Box– Behnken design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the two objective functions were obtained employing the catalyst with 1 wt.% of iridium and 0.7–0.8 wt.% of platinum; the optimal ratio between mass of catalyst and mole of tetralin was 17–19 g/mol and temperature between 200 and 220 ◦CItem Optimization of the synthesis of SBA-3 mesoporous materials by experimental desing.(Univesidsad Tecnológica Nacional., 2015) Ponte , María Virginia; Rivoira , Lorena Paola; Cussa , jorgelina; Martínez , María Laura; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Anunziata , Oscar Alfredo; Anunziata; Cussa , jorgelina; Rivoira , Lorena PaolaSBA-3 mesoporous materials are characterized by hexagonal regular arrangements of channels with diameters >2 nm, high specific surface areas and high specific pore volumes. In the work reported herein, experimental design-response surface methodology (RSM) is used to model and optimize the synthesis conditions for SBA-3 mesoporous materials. In this study, we evaluate the influences of surfactant/silica source molar ratios, aging times, temperature and pH on the synthesis of SBA-3 mesoporous materials by analyzing the XRD intensities pertaining to the [100] signal. Response surfaces were obtained using the BoxeBehnken design, and the combination of reaction parameters was optimized. By applying statistical methodology, higher levels of the objective function (XRD intensities pertaining to the [100] signal) were obtained using cetyltrimethylammonium bromide (CTAB)/tetraethyl orthosilicate (TEOS) molar ratios of 0.07 and 0.16, HCl/TEOS molar ratios of 8 and 11, reaction temperatures of 35 and 45 ◦C and aging times of 12e24 h. The mesoporous SBA-3 samples obtained were characterized using small-angle X-ray powder diffraction (XRD), BET, FTIR and 29Si NMR-MAS, scanning electron microscopy (SEM) and transmission electron microscopy (TEM).Item Ir-Pt/SBA-15 applied in the optimization of tetralin hydrogenation.(Univesidsad Tecnológica Nacional., 2015) Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Anunziata; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma , Brenda CeciliaBimetallic catalysts have received considerable attention for hydrotreating (HDT) because they show high activity. The features of the catalysts here studied are going to be correlated with their catalytic performance in the hydrogenation of tetralin at mild conditions. The final goal is to find the optimal proportion of each metal in order to be more active and the best reaction conditions (temperature and amount of catalyst). The statistical experiments design is the process of planning an experiment to obtain appropriate data that can be analyzed by statistical methods, to produce concrete and valid conclusions. One of the main advantages in the response curve is to visualize the response for all levels of the experimental factors Experiment design response surface methodology (RSM) is used in this work to model and to optimize the process. Platinum and Iridium nanoparticles were incorporated into SBA-15 support by the wet co-impregnation method. Ir content was set as 1wt. % and Pt was varied from 0 to 1wt. %. The catalysts were characterized by XRD, BET, XPS, TEM, ICP and TPR. XRD profiles are characteristic of the two-dimensional p6mm hexagonal mesostructure with d100 spacing of 10.16 nm; where the d100 spacing upon Ir and Pt incorporation were quite similar to pristine SBA-15. The TEM images and XPS demonstrate that the metal particles were mainly present inside the porous and XPS and TPR corroborated the reduced state of the metals. The catalytic activity was measured in a 4563Parr reactor at 15 atm of hydrogen and 360 rpm. Feed consisted in 50 mL of tetralin in Dodecane, the amount of tetralin is set according to the ratio of catalyst mass/mass reagent corresponding to each reaction. The application of this methodology allows a better understanding of the influence of the different factors: content of metal on catalyst (A), relationship: mass of catalyst/reagent mass (B) and reaction temperature (C), on two responses: conversion at 3 h and at 5 h of reaction time. These factors were carefully selected taking account the influence of the parameters in the reaction. The design was analyzed by Statgraphics and Statistica Soft. We found that, the variable Catalyst has the best influence over the Conversion at the 95.0% confidence level, according to the Pareto.Item Tetralin Hydrogenation over Ir-Pt/SBA-15. Optimization by experimental desing.(Univesidsad Tecnológica Nacional., 2015) Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma , Brenda CeciliaBimetallic catalysts have received considerable attention for hydrotreating (HDT) because they show high activity. The features of the catalysts here studied are going to be correlated with their catalytic performance in the hydrogenation of tetralin at mild conditions. The final goal is to find the optimal proportion of each metal in order to be more active and the best reaction conditions (temperature and amount of catalyst). The statistical experiments design is the process of planning an experiment to obtain appropriate data that can be analyzed by statistical methods, to produce concrete and valid conclusions. One of the main advantages in the response curve is to visualize the response for all levels of the experimental factors Experiment design response surface methodology (RSM) is used in this work to model and to optimize the process. Platinum and Iridium nanoparticles were incorporated into SBA-15 support by the wet co impregnation method. Ir content was set as 1wt. % and Pt was varied from 0 to 1wt. %. The catalysts were characterized by XRD, BET, XPS, TEM, ICP and TPR. XRD profiles are characteristic of the two-dimensional p6mm hexagonal mesostructure with d100 spacing of 10.16 nm; where the d100 spacing upon Ir and Pt incorporation were quite similar to pristine SBA-15. The TEM images and XPS demonstrate that the metal particles were mainly present inside the porous and XPS and TPR corroborated the reduced state of the metals. The catalytic activity was measured in a 4563Parr reactor at 15 atm of hydrogen and 360 rpm. Feed consisted in 50 mL of tetralin in Dodecane, the amount of tetralin is set according to the ratio of catalyst mass/mass reagent corresponding to each reaction. The application of this methodology allows a better understanding of the influence of the different factors: content of metal on catalyst (A), relationship: mass of catalyst/reagent mass (B) and reaction temperature (C), on two responses: conversion at 3 h and at 5 h of reaction time. These factors were carefully selected taking account the influence of the parameters in the reaction. The design was analyzed by Statgraphics and Statistica Soft. We found that, the variable Catalyst has the best influence over the Conversion at the 95.0% confidence level, according to the Pareto.Item Experimental Desing Optimization of the tetralin Hydrogenation over Pt-Ir/SBA-15.(Univesidsad Tecnológica Nacional., 2015) Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma , Brenda Ceciliahe oil refining industry has a difficult challenge to meet the increasingly stringent regula tions on environmental issues. Contaminants such as sulfur, nitrogen, fused ring aromatic compounds or metals are the principal to remove to achieve "green" fuels. The hydrotreating (HDT) is one of the processes most used in the refinery to remove these contaminants. To optimize the gas oil hydrotreater, it is crucial to understand the aromatic hydrogenation reac tion chemistry occurring in the gas oil hydrotreater. To find alternative processes, it is neces sary to develop new and more active catalysts to replace the current ones. Bimetallic Pt–Pd catalysts have received considerable attention, because they show high actvity in a variety of catalytic applications [1,2]. From a fundamental point of view, exploring bimetallic catalysts also allows better understanding of mechanisms and variables involved in the catalytic reac tions. The features of the catalysts here studied are going to be correlated with their catalytic performance in the hydrogenation of tetralin. The final goal is to find the optimal proportion of each metal in order to be more active and the best reaction conditions. The statistical expe riments design is the process of planning an experiment to obtain appropriate data that can be analyzed by statistical methods, to produce concrete and valid conclusions [3]. One of the main advantages in the response curve is to visualize the response for all levels of the experi mental factors Experiment design response surface methodology (RSM) is used in this work to model and to optimize the process.Item Hydrogenation of tetralin in presence of nitrogen using a noble-bimetallic couple over a Ti-modified SBA-15.(Univesidsad Tecnológica Nacional., 2017) Vallés , Verónica Alejandra; Ledesma , Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma , Brenda CeciliaThe increased attention paid to catalytic hydrogenation in the oil refining industry is due in part to legislation regarding the maximum contents of sulfur, aromatic compounds, and alkenes in traffic fuels. Aromatics in diesel increase the particle emissions in exhaust gases and they have the further effect of lowering the fuel quality. Many factors such as the catalysts, process parameters, feedstock source and quality, reactivities of sulfur compounds, inhibition effects of H2S, nitrogen compounds and aromatics present in the feed, etc. can have significant influences on the degree of hydrogenation of diesel feeds1,2. Recently, studies have been reviewed and the investigations have also been extended to noble metals3 . In our previous investigations with bimetallic catalysts4 , we had very good results preparing the catalysts by co impregnation of the relevant metals on the SBA-15 mesoporous matrix. These studies showed high activity, selectivity and stability as well also greater resistance to poisons compared to monometallic catalysts. In this contribution titanium is incorporated in tetrahedral position replacing silicon in the mesoporous framework. We expect that Ti incorporation improve the dispersion of the bimetallic clusters. In the present work three compounds tetralin, indole and quinoline were used as models for the compounds in diesel. The model compounds were hydrogenated both separately and as mixtures in order to study the inhibition effect.Item Optimización de la síntesis del material mesoestructurado SBA-3 mediante diseño experimental.(Univesidsad Tecnológica Nacional., 2016) Ponte, María Virginia; Rivoira , Lorena Paola; Cussa , Jorgelina; Martínez , María Laura; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Anunziata , Oscar Alfredo; Martínez , María Laura; Cussa , jorgelina; Rivoira , Lorena PaolaEl material SBA-3 está constituido por una estructura de sílice mesoporosa de ordenamiento de poros regular hexagonal, diámetro de poro >3nm; presenta alta área superficial y alto volumen de poro. Se utilizó la metodología de Superficie de Respuesta para el modelado y optimización de las condiciones de síntesis de SBA-3. Se analizaron como factores del Diseño la influencia de la relación molar entre el surfactante (CTAB) y la fuente de silicio (TEOS), el tiempo de envejecimiento, la temperatura y el pH de la síntesis utilizando HCl. La respuesta analizada fue la intensidad de difracción de rayos X para el plano [100]. Las superficies de respuestas se obtuvieron con el diseño Box–Behnken, buscando la combinación de los parámetros que dieran como resultado la mejor estructura en el material sintetizado. Mediante la aplicación de metodología estadística, los mayores valores de la función objetivo (intensidad de DRX para el plano [100]) se obtuvieron utilizando valores de la relación molar CTAB/TEOS de 0,07-0,16; HCl/TEOS de 8-11; temperatura de síntesis de 35-45 (ºC) y tiempos de envejecimiento de 12-24hr.Item Experimental desing optimization of the ods of DBT using V2O5 supported on GA-SBA-15.(Univesidsad Tecnológica Nacional., 2020) Rivoira , Lorena Paola; Cussa , jorgelina; Martínez , María Laura; Beltramone , Andrea Raquel; Martínez , María Laura; Cussa , jorgelinaExperiment design-response surface methodology (RSM) was used in this work to model and optimize one response in the oxidative desulfurization of dibenzothiophene with hydrogen peroxide using VOx Ga-SBA-15 catalysts with different Ga/Si and V/Si ratios. In this study, we analyze the influence of the nature of the catalyst (metal/Si ratio), the substrate/catalyst mass ratio and the oxidant/substrate ratio as factors for the design. The response analyzed was conversion at 15 min of reaction time. The response surfaces were obtained with the Box– Behnken Design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the objective function were obtained employing the catalyst with 4 wt.% of gallium and 6 wt.% of vanadium; the optimal ratio between g DBT/g of catalyst was 4 and the molar ratio H2O2/DBT was 5. The incorporation of gallium as heteroatom in tetrahedral position allows the better anchorage of the active species of vanadium generating a very well dispersed catalyst. Structural and textural characterization of the catalysts were performed by means of XRD, N2 adsorption, UV–Vis–DRS, XPS, NMR, TEM, Raman, TPR and Py-FTIR. UV–Vis–DRS and Raman demonstrated that highly dispersed vanadium pentoxide crystallites are responsible for the high activity in the sulfur removal. The high dispersion depended on the vanadium loading and on the nature of the support. The experiment design was able to find the best combination between the heteroatom and the vanadium active site in order to find the most active catalyst for ODS of DBT at the optimized experimental conditions.Item Experimental Desing Optimization of the ODS of DBT using V2O5 supported on Ga-SBA-15.(Univesidsad Tecnológica Nacional., 2020) Rivoira , Lorena Paola; Cussa , jorgelina; Martínez , María Laura; Beltramone , Andrea Raquel; Martínez , María Laura; Cussa , jorgelinaExperiment design-response surface methodology (RSM) was used in this work to model and optimize one response in the oxidative desulfurization of dibenzothiophene with hydrogen peroxide using VOx-Ga-SBA-15 catalysts with different Ga/Si and V/Si ratios. In this study, we analyze the influence of the nature of the catalyst (metal/Si ratio), the catalyst/substrate ratio and the oxidant/substrate ratio as factors for the design. The response analyzed was conversion at 15 min of reaction time. The response surfaces were obtained with the Box–Behnken Design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the objective function were obtained employing the catalyst with Ga/Si and V/Si ratios of v1/15 and 1/25, respectively. Structural and textural characterization of the catalysts were performed by means of XRD, N2 adsorption, UV–Vis–DRS, XPS, NMR, TEM, Raman, TPR and Py-FTIR. UV–Vis–DRS and Raman demonstrated that highly dispersed vanadium pentoxide crystallites are responsible for the high activity in the sulfur removal. The high dispersion depended on the vanadium loading and on the nature of the support.Item Experimental desing optimization of the ODS of DBT using V2O5 supported on GA-SBA-15.(Univesidsad Tecnológica Nacional., 2020) Rivoira , Lorena Paola; Cussa , jorgelina; Martínez , María Laura; Beltramone, Andrea Raquel; Martínez , María Laura; Cussa , jorgelinaExperiment design-response surface methodology (RSM) was used in this work to model and optimize one response in the oxidative desulfurization of dibenzothiophene with hydrogen peroxide using VOx Ga-SBA-15 catalysts with different Ga/Si and V/Si ratios. In this study, we analyze the influence of the nature of the catalyst (metal/Si ratio), the substrate/catalyst mass ratio and the oxidant/substrate ratio as factors for the design. The response analyzed was conversion at 15 min of reaction time. The response surfaces were obtained with the Box– Behnken Design, finding the best combination between the reaction parameters that allowed optimizing the process. By applying the statistic methodology, the higher levels of the objective function were obtained employing the catalyst with 4 wt.% of gallium and 6 wt.% of vanadium; the optimal ratio between g DBT/g of catalyst was 4 and the molar ratio H2O2/DBT was 5. The incorporation of gallium as heteroatom in tetrahedral position allows the better anchorage of the active species of vanadium generating a very well dispersed catalyst. Structural and textural characterization of the catalysts were performed by means of XRD, N2 adsorption, UV–Vis–DRS, XPS, NMR, TEM, Raman, TPR and Py-FTIR. UV–Vis–DRS and Raman demonstrated that highly dispersed vanadium pentoxide crystallites are responsible for the high activity in the sulfur removal. The high dispersion depended on the vanadium loading and on the nature of the support. The experiment design was able to find the best combination between the heteroatom and the vanadium active site in order to find the most active catalyst for ODS of DBT at the optimized experimental conditions.
- «
- 1 (current)
- 2
- 3
- »