FRLP - I+D+i - CENTROS - CITEMA
Permanent URI for this communityhttp://48.217.138.120/handle/20.500.12272/1746
Browse
Item Synthesis, characterization and swelling behavior of new pH-sensitive hydrogels derived from copolymers of 2-hydroxyethyl methacrylate and 2-(diisopropylamino) ethylmethacrylate(2012) Faccia, Paula; Amalvy, JavierThe aim of this work was to synthesize and to characterize new pH-sensitive hydrogels that can be used in the controlled release of drugs, useful for dermal treatments or ophthalmology’s therapies. Copolymers containing 2-hydroxyethyl methacrylate (HEMA) with different amounts of 2-(diisopropylamino)ethyl methacrylate (DPA) (10 and 30 wt %) and different amounts of cross- linker agent, ethylene glycol dimethacrylate (EGDMA) (1 and 3 wt %) were prepared by bulk photo-polymerization. The copolymers were fully characterized by using Fourier-transform infrared (FTIR) spectra, differential scanning calorimetry, thermogravimetric anal- ysis, UV–visible spectroscopy, and measuring water content and dynamic swelling degree. The results show that modifications in the amount of DPA and/or crosslinker in the hydrogel produce variations in the thermal properties. When adding of DPA, we observed an increase in the thermal stability and decomposition temperature, as well as a change in the mechanism of decomposition. Also a decrease in the glass transition temperature was observed with regard to the value for pure pHEMA, by the addition of DPA. The water content of the hydrogels depends on the DPA content and it is inversely proportional to both the pH value and the crosslinking degree. Pure poly-HEMA films did not show important changes over the pH range studied in this work. The dynamic swelling curves show the overshooting effect associated with the incorporation of DPA, the pH of the solution, and the crosslinking density. On the other hand, no important variations in the optical properties were observed. The synthesized hydrogels are useful as a drug delivery pH-sensitive matrix.Item Synthesis and swelling behavior of pH-responsive polyurethane poly(2-(diethylamino)ethyl methacrylate) hybrid materials(2013) Pardini, Francisco; Amalvy, JavierPolyurethane (PU)/poly[2-(diethylamino)ethyl methacrylate] hybrids, having a chemical bond between the PU and acrylic moieties and with different compositions, were prepared by the dispersion polymerization of 2-(diethylamino)ethyl methacrylate (DEA) in the presence of preformed PU chains with polymerizable terminal vinyl groups. The PU dispersion was synthesized accord- ing to a prepolymer mixing process by the polyaddition of isophorone diisocyanate, poly(propylene glycol), 2-hydroxyethyl methacry- late, and dimethylol propionic acid (DMPA). Then, it was dispersed in water by the prior neutralization of the carboxylic acid groups of DMPA with triethylamine, chain-extended with ethylenediamine. The effect of the DEA content on the swelling properties (water uptake and dynamic swelling degree) at different pHs and at 37�����C was determined. The samples were also characterized by Fourier transform infrared spectroscopy and modulated differential scanning calorimetry. The experimental results indicate a higher water uptake when the DEA content was increased on the hybrid materials and a significant change in the kinetics of swelling at pH 4 com- pared to those at pH 7. The water content of the hydrogels depended on the DEA content, and it was inversely proportional to the pH value. The pure PU film did not show important changes over the pH range examined in this study. The synthesized hybrids were useful as drug-delivery, pH-sensitive matrices.Item Preparation and evaluation of carbon supported catalysts for ethanol oxidation(Springer, 2013) Bonesi, Alejandro; Asteazaran, Mariano; Moreno, Mario; Bengio, Silvina; Zampieri, Guillermo; Triaca, Walter; Castro Luna, AnaSupported PtSnIr/C, PtSn/C, and IrSn/C catalysts with potential application in a direct alcohol fuel cell were prepared by chemical reduction employing Pechini methodology. The catalyst particles were characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy (XPS). Linear sweep voltammetry (LV), chronoamperometry, and electrochemical impedance spectroscopy (EIS) measurements were performed by using a glassy carbon working electrode covered with the catalyst in a 1 M ethanol+0.5 M H2SO4 solution at 60 °C. It was demonstrated through XPS that PtSnIr/C and IrSn/C contain both IrO2 and SnO2. LV and chronoamperometry show a better catalytic behavior for ethanol oxidation on PtSnIr/C in the low-potential region and the improvement is attributed to the presence of both Sn and Ir oxides. The EIS accurately established that PtSnIr/C improved ethanol oxidation at lower potentials than PtSn/C.Item Estudio del agregado de cobalto vía “electroless” a electrodos de hidróxido de níquel(2013-04-09) Ortiz, Mariela; Castro, Élida Beatriz; Real, SilviaEl hidróxido de níquel es utilizado como material de cátodos en baterías alcalinas del tipo Ni/Cd, Ni/Fe, Ni/Zn, Ni/H, Ni/MH. Para mejorar las propiedades de este material y así su desempeño, en los dispositivos mencionados, se incorporan aditivos. En este trabajo se estudia la incorporación de cobalto sobre la superficie del material activo, Ni(OH)2, utilizando la técnica “electroless” variando el tiempo de inmersión: 5, 15 y 30 minutos. La caracterización de los electrodos se realizó empleando técnicas electroquímicas y ópticas.Item Decay resistance and dimensional stability of Araucaria angustifolia using siloxanes synthesized by solegel process(Elsevier, 2013-05-16) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupeSolid wood specimens of Araucaria angustifolia were impregnated with alkoxysilanes hydrolyzed and condensed “in situ” by the solegel process. Alkoxysilanes selected were aminopropyl methyldiethoxysilane and aminopropyl triethoxysilane; it was also used the aminopropyl methyldiethoxysilane/aminopropyl triethoxysilane mixture in 50/50 ratio w/w. The pH was adjusted to alkaline value for controlling kinetic of hydrolysis and condensation reactions. Impregnation process was carried out under controlled operating conditions to achieve different weight gains of the chemical modifier. Unmodified and modified wood specimens were exposed to brown rot (Polyporus meliae) and white rot (Coriolus versicolor) under laboratory conditions. The results indicate that the improved resistance to fungal exposure would be based on the wood chemical modification (the protection of cellulose caused by steric hindrance of hSieOeCellulose preventing the formation of enzymeesubstrate complex). Moreover, the results also would be based on the enhanced dimensional stability of the treated wood; the quoted high dimensional stability, which limits the growth of the spores, is supported in the hydrophobicity generated by both the decreasing of the amount of polar hydroxyl groups and the partial occupation of pores with polysiloxanes.Item Hybrid finishing coatings applied on laminar zinc primers(American Chemical Society, 2013-05-29) Giúdice, Carlos Alberto; Canosa, Guadalupe; Alfieri, PaulaHybrid finishing coatings were formulated with several film-forming materials and reinforcement fibers. In all cases, the same tri-pigmented epoxy-polyamide coating based on laminar zinc was used as primer. The results indicated that wellwetted fibers improved mechanical properties of finishing coating films, such as tensile strength, modulus of elasticity, hardness, adhesion, and impact resistance; on the other hand, elongation decreased according with type and level of reinforcement fibers selected. In addition, finishing coatings with semiconductive fibers displayed in salt spray (fog) apparatus, a high dissolution of metallic zinc of primer since these fibers would act as cathode in galvanic cells. According to IR spectrum analysis, chemical degradation was observed only in coatings with the binder susceptible to basic hydrolysis due to the action of hydroxyl ions formed on semiconductive fibers. Furthermore, nonconductive fibers included in finishing coatings displayed no changes in any film-forming material (even when alkyd resin was used) nor promoted excessive zinc dissolution of primer.Item Preparación y caracterización del electrodo positivo de baterías de Ni-HM con aditivos de cobalto(HYFUSEN, 2013-06-09) Ortiz, Mariela; Castro, Élida Beatriz; Real, SilviaLa tendencia mundial de optar por tecnologías denominadas “limpias” conlleva a que se invierta en el desarrollo de tecnologías de fuentes energéticas alternativas. Dentro de estos dispositivos se incluye a las baterías alcalinas del tipo Ni-H y Ni-HM, en las que el electrodo positivo tiene como material activo hidróxido de níquel. Ha sido estudiado con agregados de diferentes aditivos (Co, Ca, Zn, C, materiales nanoestructurados, etc.), los que contienen Co resultan ser los más exitosos debido a que: incrementa la reversibilidad del par redox Ni(OH)2/NiOOH, aumenta el sobrepotencial de evolución de oxígeno, mejora la conductividad y reduce el crecimiento de especies γ-NiOOH durante la carga.Item Electrochemical characterization of Nickel Hydroxide electrodes with MWCNT(Anual Meeting of ISE, 2013-09-08) Ortiz, Mariela; Real, Silvia; Castro, Élida BeatrizAlkaline secondary batteries are widely required in the current market of electronic devices. Particularly, nickel hydroxide active material is the positive electrode in Ni/H2 and Ni/MH batteries. Due to their semiconductor nature, it becomes necessary to solve this limitation. A poor electrical contact yields ohmic overpotential and capacity loss at high currents. The carbon nanotubes (CNT) employed as additive was first studied by Lvetal.[1] who found that the addition of NTC may improve battery performance at high download speeds. However, discussions about the way that CNT affect structural and kinetic parameters are still acking. In this work, the addition of multiwall carbon nanotubes (MWCNT) is investigated. The active material was prepared by hydrothermal synthesis method. The characterization was performed by optical (SEM, TEM, XRD) and electrochemical techniques (charge‐discharge cycles, cyclic voltammetry, electrochemical impedance spectroscopy ‐ EIS). The EIS technique along with a physicochemical model developed in the laboratory, are powerful tools for the estimation of physicochemical and structural parameter such as: specific active area, effective conductivity and diffusion coefficient of H+[2]. This knowledge allows electrochemical performance optimization of the systems.Item Evaluación del comportamiento al fuego de la madera de pino ponderosa impregnada con 8 soluciones potencialmente ignífugas(2013-09-25) Tonello, María Laura; Keil, Gabriel; Maly, Laura; Canosa, Guadalupe; Giúdice, Carlos Alberto;El fuego es considerado uno de los principales agentes de destrucción de objetos fabricados parcial o totalmente con madera. La madera por ser un material combustible, crea siempre el “riesgo de incendio”; esto constituye una de las limitaciones a su mayor uso en la construcción. La protección de los materiales leñosos frente al fuego está limitada a un efecto retardante, ya que ninguna sustancia química puede transformar la madera en material incombustible, dentro de los márgenes de tratamiento económico. Existe una gran variedad de sustancias que ofrecen resultados positivos sobre la demora en la propagación del fuego, la permanencia de la combustión y de la brasa. La acción de los retardantes reduce en el tiempo la pérdida de peso que sufre la madera por carbonización de la masa leñosa, al mismo tiempo que puede limitar la tendencia a la permanencia de la llama y/o brasa que aparece en la madera encendida. En la actualidad no se ha profundizado en el tema de impregnantes con productos de acción ignífuga sobre madera de Pino ponderosa, si bien es impregnada con preservantes para usos en postes rurales debido a que su madera presenta una baja durabilidad natural. (Spavento, 2011). El Pino ponderosa es una especie que se utiliza en múltiples productos y que tiene la gran ventaja de ser conocido en el mercado norteamericano, característica atractiva para la exportación hacia esos países. Es la conífera de rápido crecimiento más empleada y con gran potencial para forestar vastas extensiones en la región Andino Patagónica Argentina, mostrando crecimientos significativamente mayores que en los lugares de origen en los Estados Unidos (Gonda et al., 2009). Es una especie con una densidad baja, rango entre 351 a 550 Kg/m3 (Keil et al, 2013), se trabaja fácilmente, tanto a mano como con herramientas mecánicas, aunque en ciertos casos la resistencia de las piezas aserradas puede verse reducida por el denso agrupamiento de nudos, producto de la ramificación uninodal característica del Pino ponderosa. Otra característica que presenta esta especie es que su madera seca fácilmente. Actualmente esta especie representa el 70% de las plantaciones implantadas en la provincia de Neuquén. El volumen existente de madera de Pino ponderosa en la provincia llega a 2.212.964 m3 (Gonda et al., 2009). De acuerdo con lo expuesto y considerando la falta de estudios sobre la impregnación de esta especie con productos de acción ignífuga y de ensayos de comportamiento al fuego, es que se planteó el objetivo principal de este trabajo.Item Pinturas híbridas de terminación sobre fondos anticorrosivos de zinc modificados(Atipat, 2013-10-01) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupeLas pinturas basadas en zinc metálico presentan una mayor eficiencia contra la corrosión en relación con otros recubrimientos. Sin embargo, éstas necesitan generalmente una pintura de terminación ya sea para conferirle al sistema un mejor acabado o bien para otorgarle una protección adecuada contra la acción del medio; en otros casos, la pintura de terminación también se aplica para conferirle dureza superficial (puentes de acero, estructuras metálicas portantes, etc.). En este trabajo se seleccionaron tres sistemas en lo referente al ligante; en todos los casos se empleó el mismo “primer” epoxi-poliamídico basado en zinc laminar mientras que para la capa de terminación se seleccionaron como ligantes una resina acrílica pura, una vinílica y una alquídica. En la formulación de estas pinturas, se emplearon fibras para conferirle elevada resistencia a la rotura y alto módulo de elasticidad a la película (grafito, nitruro de silicio, vidrio o cuarzo). Los resultados indican que en las estructuras híbridas con fibras semiconductoras se observó una elevada disolución del zinc ya que las citadas fibras actuarían como cátodos de la celda galvánica; también se constató que en el caso del ligante susceptible a la hidrólisis básica se produjo su degradación y la pérdida de propiedades de la películaItem Siloxanos sintetizados in situ por el proceso solgel para el control de la acción del fuego y del ataque fúngico en maderas de araucaria angustifolia(Jornada de Ciencia y Tecnología UTN-FRLP 2013, 2013-10-09) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupeLas maderas de baja y media densidad son muy empleadas en la construcción. Sin embargo, sin ningún tratamiento pueden ser degradadas rápidamente por acción del medio ambiente; los principales problemas asociados son la inestabilidad dimensional debido a la absorción/desorción de la humedad, la rotura de los polímeros constitutivos por la radiación UV y la pérdida de resistencia por la actividad de los microorganismos. Paralelamente, las maderas de baja y media densidad presentan una reducida resistencia a la penetración del fuego y una insuficiente capacidad para formar una capa carbonizada que permita el mantenimiento de sus propiedades mecánicas durante una conflagración. En este estudio se desarrollaron investigaciones para establecer diversas propiedades de la madera modificada químicamente por impregnación con alcoxisilanos hidrolizados y condensados “in situ” por el proceso sol-gel, con el fin de permitir simultáneamente la preservación al ataque de los microorganismos y la protección contra la acción del fuego, induciendo estabilidad dimensional y sin resultar nocivos para el medio ambiente.Item Estudio de diferentes aditivos en el electrodo de hidróxido de níquel(Jornada de Ciencia y Tecnología UTN-FRLP 2013, 2013-10-09) Ortiz, Mariela; Real, SilviaLa tendencia mundial de optar por tecnologías denominadas “limpias” conlleva a que se invierta en el desarrollo de fuentes energéticas alternativas. Dentro de estos dispositivos se incluye a las baterías alcalinas del tipo Ni-HyNi-HM, en las que el electrodo positivo tiene como material activo hidróxido de níquel. Si bien ha sido estudiado con agregados de diferentes aditivos (Co, Ca, Zn, C, materiales nano estructurados, etc.), los que contienen Co resultan ser los más exitosos debido a que: incrementa la reversibilidad del par redox Ni(OH)2/NiOOH, aumenta el sobrepotencial de evolución de oxígeno, mejora la conductividad y reduce el crecimiento de especies γ-NiOOH durante la carga.Item Preparación y caracterización de ánodos de baterías de ion Litio(J, 2013-10-09) Ortiz, Mariela; Real, SilviaEl uso de fuentes de energía, basadas en recursos renovables, ha sido ampliamente reconocido como la alternativa más viable para resolver problemas asociados con la combustión térmica convencional, tal es como su ineficiencia operacional, el agotamiento de las reservas de los combustibles fósiles y el aumento de la contaminación ambiental. En la actualidad, el mercado de las baterías empleadas en los dispositivos portátiles esta dominado por el uso de las baterías de ion-litio. Para satisfacer demandas que requieren alta potencia, como por ejemplo para su empleo en vehículos eléctricos o híbridos, se necesita aún lograr la optimización del comportamiento de las curvas de carga/descarga. Este estudio está dirigido a desarrollar, preparar y caracterizar materiales de ánodos con cinéticas rápidas y gran resistencia al ciclado para su uso en baterías de ion-litio.Item Siloxanes synthesized in situ by solgel process for fire control in wood of Araucaria angustifolia(Elsevier, 2013-10-10) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupePanels of Araucaria angustifolia were chemically modified with alkoxysilanes, hydrolyzed and condensed “in situ” by the sol–gel process. Alkoxysilanes selected were aminopropyl methyldiethoxysilane (A), aminopropyl triethoxysilane (B) and a mixture of both (C). Ethanol was used as solvent in 4/1 ethanol/ alkoxide molar ratio. The pH was adjusted to alkaline value for controlling the kinetic of hydrolysis– condensation reactions. Impregnation process was carried out at 45–50 1C in an autoclave, controlling the operating conditions for achieving different weight gains. Laboratory tests were carried out in Two-Foot Tunnel (flame spread index, panel consumption and smoke density) and in TGA detector (mass loss). The performance in laboratory tests can be explicated according the reactivity of the alkoxides. The results support the conclusion that the best fireproof efficiency was observed in woods treated with the alkoxide B, followed by those modified with the mixture C and the alkoxide A, in this order; the results also indicates that as weight gain increased the performance of impregnants against fireItem Pinturas acuosas basadas en dispersiones poliméricas modificadas para la protección de fachadas del patrimonio cultural(Coibrecopa, 2013-10-16) Canosa, Guadalupe; Alfieri, Paula; Giúdice, Carlos AlbertoLos materiales de construcción son vulnerables a los agentes exteriores y por lo tanto necesitan una protección eficaz contra la intemperie, gases industriales, etc. Las pinturas, además de la función protectora, actúan como factor decorativo, de gran importancia en la presentación final. En este trabajo, se formularon pinturas de base acuosa con silicatos alcalinos y dispersión polimérica; las variables fueron las siguientes relaciones en volumen dispersión polimérica (resina acrílica estirenada)/silicato de potasio (relación sílice/álcali 5,0/1,0): 30/70, 40/60, 50/50, 60/40 y 70/30. La pigmentación y la concentración de pigmento fueron similares en todas las muestras. Los paneles experimentales fueron envejecidos en un intemperiómetro de arco de xenón, según ciclo 1 de la norma ASTM G155, durante 500 horas. Los resultados indican que las películas híbridas no presentaron agrietado ni cuarteado, que la retención de brillo y color fue decreciente con el aumento de la relación dispersión polimérica/silicato alcalino y que la permeabilidad al vapor de agua y al agua líquida, compatibilizando los resultados de ambos ensayos, correspondió al ligante basado en la dispersión polimérica/silicato de potasio en la relación 50/50 en volumen.Item Siloxanos sintetizados in situ por el proceso solgel para el control del ataque fúngico en maderas de araucaria angustifolia(Coibrecopa, 2013-10-16) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupeEn este estudio se desarrollaron investigaciones para establecer diversas propiedades de la madera modificada químicamente por impregnación con alcoxisilanos hidrolizados y condensados “in situ” por el proceso sol-gel. El objetivo fue alcanzar simultáneamente la preservación del ataque de los microorganismos y la mejora de la estabilidad dimensional de paneles de Araucaria angustifolia. Los alcóxidos seleccionados para realizar la impregnación de las probetas fueron el aminopropil metildietoxisilano, el aminopropil trietoxisilano y una mezcla de ambos, materiales no tóxicos para el hombre ni agresivos para el medioambiente. Se concluyó que la madera tratada con polisiloxanos mejoró la resistencia a la acción fúngica (pérdida de peso luego de exposición a la acción putrefactante de los hongos Polyporus meliae y Coriolus versicolor) y la estabilidad dimensional, debido a la parcial ocupación de los poros por los polisiloxanos (coeficiente de expansión volumétrica S y eficiencia ASE) y a la interacción química entre éstos y los componentes de la madera (Espectroscopía Infrarroja por Transformada de Fourier).Item Dimensional stability, fire performance and decay resistance in wood impregnated with alkylalkoxysilanes(2013-11-20) Canosa, Guadalupe; Alfieri, Paula; Giúdice, Carlos AlbertoThe wood, very heterogeneous and complex material, changes its volume by water absorption or desorption causing swelling or shrinkage and also it can be degraded both by action of microorganisms and fire; the above-mentioned is a great inconvenient for most commercial uses. In this research, wood specimens of Pinus radiata were previously pretreated in a Soxhlet extractor for 2 hours with a solution of sodium hydroxide (activation of the cellulose) and then impregnated with alkylalkoxysilanes hydrolyzed and condensed "in situ" by the sol-gel process. Silanes selected were triethoxysilane, methyltriethoxysilane, n-propyltriethoxysilane, n-buthyltriethoxysilane and n-octhyltriethoxysilane. Impregnation process was carried out under controlled operating conditions to achieve similar weight gains of the chemical modifier. The pH was adjusted to alkaline value for controlling kinetic of hydrolysis and condensation reactions. Results indicated that dimensional stability increased with the increase of the length of the hydrocarbon chain of the alkoxydes, which would be based essentially on their enhanced hydrophobicity but without discarding the partial occupation of the pores by polymerized siloxanes and the interaction of alkoxides with cell wall components. In addition, wood specimens impregnated with mentioned alkylalkoxysilanes also showed an excellent fire performance and decay resistance.Item Preparation and characterization of graphite anodes for lithium ion batteries(The Electrochemical Society, 2014) Humana, Rita; Ortiz, Mariela; Thomas, Jorge; Real, Silvia; Sedlarikova, Marie; Vondrak, Jiri; Visintin, ArnaldoThe lithium-ion batteries are energy storage systems of high performance and low cost. They are employed in multiple portable devices and these require the use of increasingly smaller and lighter batteries with high energy and power density, fast charging and long service life. Moreover, these systems are promising for use in electric or hybrid vehicles. However, the lithium-ion battery still requires to improve the electrode materials properties, such as cost, energy density, cycle life, safety, and environmental compatibility. These batteries use carbon as anode material, usually synthetic graphite, because of its high coulombic efficiency and acceptable specific capacity for the formation of intercalation compounds (LiC6). In this paper the methodology used to prepare and characterize the reversible and irreversible capacity and, cyclic stability of graphite materials as anodes in lithium-ion batteries of commercial carbon and Sungite carbon, is presented. The results obtained using electrochemical techniques, are discussed.Item Síntesis de materiales micro y mesoporosos para su uso como reservorios en procesos de liberación controlada de especies biocidas(Taller de Doctorandos en Ingeniería de Materiales, 2014) Mardones, Lucas; Legnoverde, María Soledad; Basaldella, ElenaEn la actualidad, los sólidos porosos sintéticos de alta superficie como lo son las sílices mesoporosas ordenadas, han emergido como una plataforma prometedora para la adsorción y su posterior desorción de moléculas orgánicas voluminosas tales como biocidas y medicamentos. Los estudios relacionados con la síntesis de sílices mesoporosas han generado un gran interés en el campo de los materiales avanzados por la versatilidad de uso que le confieren sus propiedades. Se plantea inicialmente estudiar la síntesis de materiales silíceos mesoporosos tipo SBA-15 y materiales silíceos desordenados de alta superficie obteniendo distintas propiedades texturales, morfológicas y superficiales. Se estudiará el uso de estos materiales como matrices estabilizadoras de biocidas basados en isotiazolinonas.Item Surface, thermal, and mechanical properties of composites and nanocomposites of polyurethane PTFE nanoparticles(2014) Anbinder, Pablo; Peruzzo, Pablo; de Siervo, A.; Amalvy, JavierFilms from blends of polyurethane and nano-polytetrafluoroethylene aqueous dispersions (PU/nanoPTFE) were prepared, and the effect of the addition of different amounts of PTFE nanoparticles (50 nm) was studied. The changes in the superficial properties of the films were studied by means of XPS, ATR/FTIR, and contact angle measurements. SEM and TEM results are also included. The contact angle values confirm the surface hydrophobicity of com- posite films. Even though nanoparticles are present in the bulk, higher concentrations of particles appear at the surface in samples with lower nanoPTFE content (up to 10 wt%), as revealed by XPS. Higher amounts of nanoPTFE particles cause aggregation. The mechanical and thermal properties of composites are also discussed.