FRLP - I+D+i - CENTROS - CITEMA
Permanent URI for this communityhttp://48.217.138.120/handle/20.500.12272/1746
Browse
5 results
Search Results
Item Flame retardant systems based on alkoxysilanes for wood protection(Intech, 2017) Giúdice, Carlos Alberto; Canosa, GuadalupeThe aim of this study was to formulate, develop, and determine the performance of flame-retardant systems for wood protection. Flame-retardant systems involve wood impregnation and intumescent coating application. The impregnation was made in two retention levels using silanes of low and high hydrophobicity (methyltriethoxysilane and n-octyltriethoxysilane, respectively); these silanes were conducted to polymerize by sol-gel process in wood pores. The intumescent coatings were formulated with a polymeric binder (hydroxy-functional acrylic resin) modified with n-octadecyltriethox- ysilane in two w/w ratios to combine the individual characteristics of each film-forming material. In this research, Pinus radiata panels were selected to study the performance of quoted flame-retardant systems. The results indicated excellent flame-retardant performance of some studied systems in two foot tunnel, in oxygen index cabin, and in horizontal-vertical chamber.Item Performance of wood impregnated with alkoxysilanes(REHABEND, 2016-05-24) Canosa, Guadalupe; Alfieri, Paula; Giúdice, Carlos AlbertoThe wood, very heterogeneous and complex material, changes its volume by water absorption or desorption causing swelling or shrinkage and also it can be degraded both by action of microorganisms and fire; the above-mentioned is a great inconvenient for most commercial uses. Solid wood specimens of Araucaria angustifolia were impregnated with alkoxysilanes hydrolyzed and condensed “in situ” by the sol-gel process. Alkoxysilanes selected were aminopropyl methyldiethoxysilane and aminopropyl triethoxysilane; it was also used the aminopropyl methyldiethoxysilane/aminopropil triethoxysilane mixture in 50/50 w/w ratio. The pH was adjusted to alkaline value for controlling kinetic of hydrolysis and condensation reactions. Impregnation process was carried out at 45–50 oC in an autoclave, controlling the operating conditions for achieving different weight gains. Unmodified and modified wood specimens were exposed to brown rot (Polyporus meliae) and white rot (Coriolus versicolor) under laboratory conditions. The results indicate that the improved resistance to fungal exposure would be based on the wood c emical modification (t e protection of cellulose caused by steric indrance of i-O-Cellulose preventing the formation of enzyme-substrate complex). Moreover, the results also would be based on the enhanced dimensional stability of the treated wood; the quoted high dimensional stability, which limits the growth of the spores, is supported in the hydrophobicity generated by both the decreasing of the amount of polar hydroxyl groups and the partial occupation of pores with polysiloxanes. Fire laboratory tests were carried out in Two-Foot Tunnel (flame spread index, panel consumption and smoke density) and in TGA detector (mass loss). The performance can be explained according the reactivity of the alkoxides; the results indicate that as weight gain increase the performance of impregnants against fire also does.Item Siloxanes synthesized in situ by solgel process for fire control in wood of Araucaria angustifolia(Elsevier, 2013-10-10) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupePanels of Araucaria angustifolia were chemically modified with alkoxysilanes, hydrolyzed and condensed “in situ” by the sol–gel process. Alkoxysilanes selected were aminopropyl methyldiethoxysilane (A), aminopropyl triethoxysilane (B) and a mixture of both (C). Ethanol was used as solvent in 4/1 ethanol/alkoxide molar ratio. The pH was adjusted to alkaline value for controlling the kinetic of hydrolysis–condensation reactions. Impregnation process was carried out at 45–50 1C in an autoclave, controlling the operating conditions for achieving different weight gains. Laboratory tests were carried out in Two-Foot Tunnel (flame spread index, panel consumption and smoke density) and in TGA detector (mass loss). The performance in laboratory tests can be explicated according the reactivity of the alkoxides. The results support the conclusion that the best fireproof efficiency was observed in woods treated with the alkoxide B, followed by those modified with the mixture C and the alkoxide A, in this order; the results also indicates that as weight gain increased the performance of impregnants against fireItem Decay resistance and dimensional stability of Araucaria angustifolia using siloxanes synthesized by solegel process(Elsevier, 2013-05-16) Giúdice, Carlos Alberto; Alfieri, Paula; Canosa, GuadalupeSolid wood specimens of Araucaria angustifolia were impregnated with alkoxysilanes hydrolyzed and condensed “in situ” by the solegel process. Alkoxysilanes selected were aminopropyl methyldiethoxysilane and aminopropyl triethoxysilane; it was also used the aminopropyl ethyldiethoxysilane/aminopropyl triethoxysilane mixture in 50/50 ratio w/w. The pH was adjusted to alkaline value for controlling kinetic of hydrolysis and condensation reactions. Impregnation process was carried out under controlled operating conditions to achieve different weight gains of the chemical modifier. Unmodified and modified wood specimens were exposed to brown rot (Polyporus meliae) and white rot (Coriolus versicolor) under laboratory conditions. The results indicate that the improved resistance to fungal exposure would be based on the wood chemical modification (the protection of cellulose caused by steric hindrance of hSieOeCellulose preventing the formation of enzymeesubstrate complex). Moreover, the results also would be based on the enhanced dimensional stability of the treated wood; the quoted high dimensional stability, which limits the growth of the spores, is supported in the hydrophobicity generated by both the decreasing of the amount of polar hydroxyl groups and the partial occupation of pores with polysiloxanes.Item Dimensional stability, fire performance and decay resistance in wood impregnated with alkylalkoxysilanes(2013-11-20) Canosa, Guadalupe; Alfieri, Paula; Giúdice, Carlos AlbertoThe wood, very heterogeneous and complex material, changes its volume by water absorption or desorption causing swelling or shrinkage and also it can be degraded both by action of microorganisms and fire; the above-mentioned is a great inconvenient for most commercial uses. In this research, wood specimens of Pinus radiata were previously pretreated in a Soxhlet extractor for 2 hours with a solution of sodium hydroxide (activation of the cellulose) and then impregnated with alkylalkoxysilanes hydrolyzed and condensed "in situ" by the sol-gel process. Silanes selected were triethoxysilane, methyltriethoxysilane, n-propyltriethoxysilane, n-buthyltriethoxysilane and n-octhyltriethoxysilane. Impregnation process was carried out under controlled operating conditions to achieve similar weight gains of the chemical modifier. The pH was adjusted to alkaline value for controlling kinetic of hydrolysis and condensation reactions. Results indicated that dimensional stability increased with the increase of the length of the hydrocarbon chain of the alkoxydes, which would be based essentially on their enhanced hydrophobicity but without discarding the partial occupation of the pores by polymerized siloxanes and the interaction of alkoxides with cell wall components. In addition, wood specimens impregnated with mentioned alkylalkoxysilanes also showed an excellent fire performance and decay resistance.