UTN- FRC -Producción Académica de Investigación y Desarrollo - Artículos
Permanent URI for this collectionhttp://48.217.138.120/handle/20.500.12272/2453
Browse
9 results
Search Results
Item Reservorio nanoscópico de hidrógeno a partir de biorresiduos de casacara de naranjas.(Universidad Tecnológica Nacional., 2022) Juárez , Juliana María; Ledesma , Brenda Cecilia; Anunziata , Oscar Alfredo; Gómez Costas , Marcos Bruno; Beltramone, Andrea Raquel; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Ledesma , Brenda CeciliaEste trabajo aborda el enfoque de valorización de biorresiduos para el desarrollo de un novedoso nanomaterial carbonoso para ser utilizado en la adsorción de hidrógeno como una alternativa en el uso de hidrógeno verde. En esta investigación, los carbones activados se sintetizaron a partir de cáscara de naranja utilizando diferentes condiciones de síntesis. Con los carbones activados obtenidos con la mejor estructura y textura se estudió la adsorción de hidrógeno y los efectos en la meso/microporosidad de estos. La activación del carbón se realizó mediante un proceso químico con ácido fosfórico como agente activador, variando la concentración de ácido, la relación sustrato / agente activador y el tiempo de contacto entre ellos. El mejor material se obtuvo utilizando tiempo de carbonización de 1 h, temperatura de carbonización de 470oC, concentración de ácido fosfórico de 50% en peso y con área BET de 1402 m2 / g. Dicho material mejoró significativamente el comportamiento de almacenamiento de H2 en comparación con el carbón nanoestructurado del tipo CMK-3 (3,1% en peso a -196,15 oC y 10 bar). El material sintetizado es prometedor en la absorción de hidrógeno por fuerzas de enlace débiles (fisisorción).Item Vanadium and titanium oxide supported on mesoporous CMK-3 asnew catalysts for oxidative desulfurization.(Universidad Tecnológica Nacional., 2016) Rivoira , Lorena Paola; Juárez , Juliana María; Falcón , Horacio; Gómez Costa, Marcos Bruno; Anunziata , Oscar Alfredo; Beltramone , Andrea Raquel; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Juárez , Juliana MaríaVanadium supported-CMK-3 catalysts with vanadium loading of 1–7 wt.% were studied in the oxidative desulfurization (ODS) of dibenzothiophene as a model sulfur compound. The activity was compared with titanium supported-CMK-3. Structural and textural characterization of the catalysts was performed by means of N2 adsorption, XRD, UV–vis–DRS, Raman spectroscopy, XPS, TEM and TPR. The dispersion and the nature of the vanadium species depend on the V loading, so does the catalyst activity. Vanadium supported-CMK-3 with 7 wt.% of vanadium loading was the most active catalyst for ODS of DBT using hydrogen peroxide (H2O2) as oxidant and acetonitrile as solvent. 100% of DBT elimination was attained at short time in mild conditions. Carbon ordered mesoporous CMK-3 with high surface area and high pore volume promotes a very good anchorage of metallic oxides in the carbons framework reaching high active sites distribution and more stable nanoclusters. The reusability of the catalyst indicates that V-CMK-3 is a potential catalyst for the ODS of dibenzothiophene.Item Vanadium oxide supported on mesoporous SBA-15 modified with AI and Ga as a highly active catalyst in the ODS of DBT.(Universidad Tecnológica Nacional., 2017) Rivoira , Lorena Paola; Martínez , María Laura; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Martínez , María LauraVanadium oxides supported on mesoporous SBA-15 catalysts with different vanadium loadings were studied in the oxidative desulfurization (ODS) of dibenzothiophene as a model sulfur compound. The catalytic activity was improved when SBA-15 framework was modified by adding Al and Ga. Structural and textural characterization of the catalysts were performed by means of XRD, N2 adsorption, UVeVis eDRS, XPS, NMR, TEM, Raman, TPR and Py-FTIR. UVeViseDRS and Raman demonstrated that highly dispersed vanadium VO—3 species are responsible for the high activity in the sulfur removal. The Ga modified support with an intermediate V/Si ratio of 1/30 was the most active catalyst for ODS of DBT, using hydrogen peroxide as oxidant and acetonitrile as solvent. 100% of DBT elimination was attained at a short time in mild conditions. Gallium and aluminum incorporation into the support modified suc cessfully the nature of the SBA-15 surface by generating Bronsted and Lewis acidity. The interaction between the acid sites with the active vanadium sites improved the activity of the catalysts. The high dispersion depended on the vanadium loading and on the nature of the support. The more acidic support allowed better dispersion of the vanadium species due to stronger interaction metal-support. The reusability of the catalysts indicates that vanadium oxide supported on mesoporous SBA-15 modified with Ga and Al are potential catalysts for the ODS of dibenzothiophene.Item Synthesis of SBA-1, SBA-3 and SBA-7 mesoporous materials. Study of the effect of time and temperature.(Universidad Tecnológica Nacional., 2016) Martínez , María Laura; Ponte , María Virginia; Falcón , Horacio; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Anunziata , Oscar Alfredo; Beltramone , Andrea Raquel; Ponte , María VirginiaIn recent years, physicists, chemists and engineers have focused their research on the design of new functional materials. In the synthesis and control of materials in nanometer dimensions, the aim is currently directed towards the development of systems and devices that take advantage of chemical properties and physical principles, where their causes lie in the nanometer scale. Although there are numerous investigations about the synthesis of mesoporous materials from inorganic silicon salt, for example the synthesis of SBA-3. Ting et al [1] studied the synthesis of SBA-1; they obtained mesoporous SBA-1 with cubic structures, with a high porous system, by utilizing agents’ routers short chain structure such as the dodecyltrimethyl ammonium chloride. Recent research also showed that the formation of mesophases is affected by the presence of the counter ions and templates or surfactants can adopt a mesophase or other phases. So, Che et al. [2] found a phase shift 2D-hexagonal cubes from P6mm to Pm3n. We have published results for synthesis of SBA-3 with silica gel as silica source; we have found that the formation of mesophase is function of NaOH concentration in the dissolutions of silica gel. The influence of reaction temperature, time and NaOH concentration was investigated. During studies for the best synthesis conditions for synthesis of SBA-3, we also obtained SBA-1 and SBA-7 mesoporous materials.Item Óxidos de vanadio y titanio soportados sobre CMK-3 como un nuevo catalizador para la desulfuración oxidativa de DBT.(Universidad Tecnológica Nacional., 2016) Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Gómez Costa , Marcos Bruno; Falcón , Horacio; Juárez , Juliana Maria; Rivoira , Lorena Paola; Rivoira , Lorena Paola; Juárez , Juliana Maria; Anunziata , Oscar AlfredoEn el presente trabajo se estudiaron catalizadores de vanadio soportados sobre el carbón mesoporosos CMK 3 con diferentes contenidos de Vanadio (1-7 % p/p) en la desulfurización oxidativa de dibenzotiofeno (DBT) como modelo de compuestos sulfurados. La actividad catalítica se comparó con catalizadores de Titanio soportados en CMK-3. Las propiedades estructurales y texturales de los catalizadores se analizaron mediante estudios de adsorción de N2, XRD, UV-Vis-DRS y TEM. Tanto la dispersión como la actividad catalítica dependen fuertemente del contenido de vanadio. La muestra que contiene el 7% p/p de Vanadio es el catalizador con mejor actividad catalítica para la reacción de ODS de DBT utilizando peróxido de hidrógeno ((H2O2) como oxidante y acetonitrilo como solvente. El 100% de la eliminación de DBT se alcanzó a corto plazo en condiciones suaves. El carbon mesoporoso CMK-3 con una alta área superficial y gran volumen de poros promueve el anclaje del metal en la red de carbono, lo que permite alcanzar una alta distribución de sitios activos y nanoclusters más estables. La reutilización del catalizador indica que V-CMK-3 es un catalizador potencial para los ODS de dibenzotiofeno.Item Hidrodenitrogenación de Indol utilizando catalizadores de Ir soportado sobre SBA-15 modificada con Ti.(Universidad Tecnológica Nacional., 2016) Ledesma , Brenda Cecilia; Vallés , Verónica Alejandra; Anunziata , Oscar Alfredo; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Vallés , Verónica AlejandraLa hidrodenitrogenación de indol se estudió utilizando una serie de catalizadores de Ir soportado sobre SBA 15 modificada con Ti. El mesoporoso modificado Ti-SBA-15 se sintetizó usando el método sol-gel. El iridio fue incorporado mediante la técnica de impregnación húmeda incipiente. Con el fin de mejorar la actividad catalítica se modificó la acidez del material mesoporoso añadiendo F o Al. Los catalizadores fueron caracterizados por difracción de rayos X (XRD), isotermas de adsorción de N2, UV-Vis-DRS, espectroscopía Raman, espectroscopía 27Al-MAS-RMN, XPS, TEM, Py-FTIR y TPR. Los análisis confirman que el Ti fue incorporado en coordinación tetraédrica dentro de la SBA-15 y que la estructura mesoporosa se mantuvo después de la incorporación de F o Al. La espectroscopía27Al-MAS-RMN indica que el aluminio se incorporó principalmente en posicion tetraédrica. Los resultados mostraron que la incorporación del Ti ayuda a reducir significativamente el tamaño de los clusters de Iridio y mejora considerablemente su dispersión. El catalizador Ir-Ti-SBA-15, modificado con Al, fue el catalizador más activo para la hidrodenitrogenación de indol, en condiciones suaves en un reactor discontinuo. Los datos experimentales para la hidrodenitrogenación de indol fueron cuantitativamente representados por una ecuación de velocidad del tipo Langmuir-Hinshelwood.Item Sílica Gel como fuente de silicio: Síntesis y caracterización de matrial mesoporoso.(Universidad Tecnológica Nacional., 2015) Ponte , María Virginia; Martínez , María Laura; Beltramone , Andrea Raquel; Anunziata , Oscar Alfredo; Anunziata , Oscar Alfredo; Martínez , María LauraEl material mesoporoso SBA-3 fue sintetizado mediante el método sol-gel, utilizando silicato de sodio como fuente de silicio y bromuro de hexadeciltrimetilamonio (CTAB) como agente director de estructura en condiciones acidas. El silicato sódico se generó in-situ por disolución de silica gel en NaOH. Se estudió el efecto de la variación de temperatura, la concentración de NaOH, y el tiempo de reacción. El mejor material mesoporoso con estructura SBA-3 fue obtenido con las siguientes condiciones de síntesis: temperatura: 25ºC; tiempo de reacción: 45min; concentración de NaOH: 0.8M.Item ODS of dibenzothiopene with titanium-modified SBA-16.(Universidad Tecnológica Nacional., 2015) Rivoira , Lorena Paola; Vallés , Verónica Alejandra; Beltramone , Andrea Raquel; Martínez , María Laura; Ledesma , Brenda Cecilia; Anunziata , Oscar Alfredo; Anunziata , Oscar Alfredo; Ledesma , Brenda Cecilia; Martínez , María Laura; Vallés , Verónica AlejandraOver the past, oxidative desulfurization (ODS) has drawn considerable interest as a new alter native method for deep sulfur elimination from light oils. This can be attributed to its attrac tive properties, including lower temperature and pressure conditions and lower operating cost [1-3] than conventional hydrodesulfurization (HDS) process. Oxidation of organosulfur com pounds results in the formation of sulfoxides/sulfones, highly polar and hence easily removed by both extraction into polar solvents or by adsorption. Due to their low reactivity, diben zothiophene derivatives (DBTs) are the most refractory species to be eliminated from oils. Hence, the ODS process through which DBTs are converted to their corresponding sulfones involves great interest at present [4-6]. We recently reported a good performance of this sup port in hydrotreating processes [7]. In this work, we describe the preparation and characteriza tion of new mesoporous catalytic materials based on Ti-containing SBA-16. We study here, the effect of the preparation method of titania-modified SBA-16 (characteristics of the active Ti and/or TiO2 species) and the effect of the different operation conditions in ODS of DBT under mild conditions in order to find the best performance. TiO2-modified mesoporous SBA 16 and titanium-substituted mesoporous SBA-16 were developed and tested in the oxidative desulfurization (ODS) of dibenzothiophene prevailing in liquid fuel. We assessed the impact exerted on performance of different reaction variables, including (nature and amount of the active catalytic species, phase system, molar ratio of oxidant H2O2 and DBT, reaction tempe rature, nature of the substrate and reuse of catalysts).Item Síntesis y caracterización de un catalizador soportado iridio/platino-SBA-15 para su aplicación en la Hidrogenación de Tetralin.(Univesidsad Tecnológica Nacional, 2014) Vallés , Verónica Alejandra; Ledesma, Brenda Cecilia; Rivoira , Lorena Paola; Cussa , jorgelina; Anunziata , Oscar Alfredo; Beltramone, Andrea Raquel; Anunziata , Oscar Alfredo; Cussa , jorgelina; Rivoira , Lorena Paola; Ledesma, BrendaIn this paper the effect of the dispersion of noble metals Ir and Pt and interaction with the SBA-15 support was studied by relating them to the catalytic activity of the catalyst in the hydrogenation reaction of Tetralin using a Parr reactor at 250°C and 15 atm. With this objective Ir/Pt-SBA-15 modified catalysts were synthesized with different % of Ir and Pt. The mesostructure of SBA-15 support gives a relatively high thermal stability and proper pore diameter can converts large molecules such as those present in the liquid fuels. The support was prepared by the sol-gel method. The catalytic site was obtained using incipient co impregnation method. The material was characterized by X-ray diffraction (XRD) and TEM). The metal dispersion was calculated by H2 chemisorption and TEM. Iridium / Platinum particles (d = 2,0-4,0 nm) homogeneously dispersed were obtained with a dispersion of more than 60%.